Former Philips chip business NXP tends to lurk in the mobile shadows behind Qualcomm and TI, but in the run-up to next week’s Mobile World Congress in Spain, it is talking up two breakthroughs in one of the areas where it has some genuine differentiation, low power chips for advanced applications. It will show off its previously promised LTE programmable modem at the massive event, and has unveiled its first product for mobile television.
The Dutch company has announced a breakthrough low power, low price chip that could undermine most of the existing devices in the nascent mobile TV sector. In high volumes the chips are for sale at $2 each, compared to $10 for most rivals, and use around half the power of existing chips on the market, making them ideal for handsets.
The last thing that Philips did about its DVB-H chip before spinning off NXP was to issue the second generation design in April 2006, claiming this was six times smaller than the crude effort it had brought to market a few months earlier in order to be included in early DVB-H trials. But the new NXP chip is a complete rethink, following on the increasingly obvious strategy adopted initially by companies like Israel’s Siano, but now almost universally accepted, of using one device to support almost all the broadcast mobile TV standards out there.
The NXP multiband silicon tuner comes with support for DVB-T, DVB-H, DVB-SH, T-DMB and ISDB-T. The only technologies that it has failed to put into the device are Qualcomm’s MediaFLO and the Chinese homegrown STiMi mobile TV technology, though presumably the latter could follow in future. Interestingly NXP is one of the first chipmakers to acknowledge the value of the DVB-SH implementation backed by Alcatel, although DiBcom does also have a product for this standard for satellite/terrestrial hybrid operation.
The NXP TDA18292 also has a tuner that will support VHF and UHF, plus satellite L-band and S-band spectrum, giving it a range from 300MHz right up to over 2GHz.
The two elements that stand out about this chip are its ultra-low power threshold and its price. NXP says that in DVB-H mode it operates at 20mW, around half the power of most of the devices already out there. This level is just 170mW when used with the far more power hungry DVB-T and 80mW with T-DMB, which, like DVB-T, has a continuous battery drain, unlike DVB-H’s burst approach, which switches off the radio for large parts of the time.
The NXP chip also boasts that it is exceptionally low noise, has a remarkably small footprint and has high immunity to other cellular signals. The vendor will target the chip at notebooks, USB sticks for PCs, Portable Multimedia Players, portable DVD players, mobile phones, portable navigation systems and virtually any other handheld devices.
The chip works in all the channel bandwidths associated with those technologies, supporting 1.5MHz to 8MHz channels
The device is 5mm x 5mm, which considering it does so much compares well with its previous effort of 7mm x 7mm, and the initial device with was a colossal 15mm x 26mm.
Most mobile TV operations have assumed that both NXP and Texas Instruments had dropped out of contention, given that neither company has openly said that it is shipping anything new on mobile TV for almost two years. When we interviewed Texas Instruments recently, it told us that it was still offering its Hollywood chip in low volumes, and would ramp the device once there was a market to fulfil. That type of approach has left the mobile TV market to DVB-H pioneer DiBcom, as well as Siano Mobile Silicon, US-based Newport Media and a handful of other start-ups, with the first two establishing key design wins.
Also, NXP will demonstrate in Barcelona its multimode, programmable LTE modem that will be the basis of a software defined radio system from the company. The modem, built round NXP’s Embedded Vector Processor (EVP), will have theoretical data rates of 150Mbps on the downlink and 50Mbps on the uplink. It complies with the 3GPP R8 radio specification for LTE and also supports UMTS and EDGE/GPRS/GSM. NXP is targeting the modem at the handsets market but also plans to optimize the design for next generation laptops, internet tablets and ultra-mobile PCs.
“This is the first cellular system solution to use NXP’s breakthrough EVP technology to support the entire GSM family of standards, right through to LTE,” said Marc Cetto, general manager of NXP’s mobile and personal business unit. “Using a software defined radio approach, we can create silicon and system platforms that evolve as quickly as the industry does.”
NXP first showed off EVP last fall, unveiling it hard on the heels of Qualcomm’s Gobi architecture, with its promise of software defined handsets that could adapt intelligently to different networks. Initially, the Dutch contender was targeting its SDR platform at China and signed up Samsung as its initial customer and co-developer. It says its
Adelante Embedded Vector Processor (EVP) technology can enable phones to reconfigure themselves on the fly to work with GSM, GPRS, EDGE, W- CDMA and HSPA, as well as the Chinese 3G standard TD-SCDMA and future networks like LTE.
As well as EVP, the new platform, which has been adopted initially for the new Samsung SGH-T578H handset, incorporates the 7210 system design from T3G Technologies of China. This claims to use the world’s first 2.8Mbps HSDPA modem IC and also supports quad band EDGE and dual band TD-SCDMA, with integrated multimedia accelerators.
Advanced programmable DSPs, such as EVPs, provide a means to avoid having a dedicated wireless transceiver for each protocol supported, and so reducing what NXP calls the ‘porcupine effect’ of multiple antennas, which add to bulk, cost and power consumption and often cause interference. Instead, a software defined radio implemented using an EVP can provide a single module block to handle all the standards. This was seen as too complex and costly when handset makers were typically using only a couple of wireless technologies at a time ‘ Bluetooth and GSM, for instance, or EDGE and GPS. Now that Bluetooth, GSM, HSPA and, increasingly, Wi-Fi, FM and GPS, are becoming standard in all midrange to high end models, there is a better case for including them all in one module block, rather than having vendors mix and match different dedicated modules as plug-ins to a basic chassis. Soon, emerging radios like mobile TV, WiMAX and LTE will start to be factors as well.
In the monolithic approach, all or part of the RF and baseband functionality is shared by different RF communication channels, especially where the technologies operate in the same frequency, like Bluetooth and 802.11b/g in 24GHz, or where they use similar modulation schemes (like WiMAX and LTE) and so can use one programmable modem. NXP believes that, while there is limited room for differentiation in the RF or codec, because specifications are so rigidly defined, in the modem there is still a significant chance for designers to gain competitive advantage, especially if they can increase multi-technology flexibility to improve the performance and economics of wireless devices.
NXP is number three in the handset baseband chip market with 5.8% share, according to iSuppli, behind TI and Qualcomm and ahead of Freescale on 4.8% and STMicro on 4.1%.