Your browser is not supported. Please update it.

12 February 2008

MWC: More big name vendors and operators get behind femtocells

Femtocells first grabbed major headlines a year ago in Barcelona and at this year’s Mobile World Congress in the Spanish city, the miniaturized base stations were firmly in the spotlight. Several large operators went public on trials, with Telefonica O2 even outlining a commercial deployment plan in the UK, and some of the equipment majors, including Motorola, jumped into the market.

O2 is carrying out user trials in the UK and plans commercial launch early next year. It is working with NEC, which is currently the most aggressive of the major manufacturers about femtocells, and which uses the ZoneGate 3G design from UK start-up Ubiquisys. It is also reported that O2 will trial an alternative solution from ZTE. O2 says its critical issue is NEC’s claim that its offering ‘ which includes the femtocells, access point management and provisioning systems ‘ is ‘zero touch’, in other words that users really will be able to instal and run their femtocells without requiring help and support from the operator.

Vivek Dev, chief operating officer of Telef’nica O2 Europe, said in a statement: ‘Our Apple iPhone is already driving unheard-of levels of mobile internet usage, and the introduction of flat rate data tariffs is expected to increase this further. Both of these place huge capacity demands on our networks, and because so much of that usage is at home, femtocells coupled with DSL could provide an alternative capacity resource.’

O2’s parent company Telefonica is trialling femtocells from Huawei and Alcatel-Lucent (which sources its units from Sagem) in its home country, Spain, and Vodafone has now revealed that it is testing the same vendors’ systems, also in Spain.

Ubiquisys is also the technology vendor behind Motorola’s new femtocells, which come out of its home networks operations. Motorola is offering the 8000 Series Femtocell Access Point, a standalone unit with an Ethernet bridge; and the 8100 Series Femtocell Ethernet Gateway, an integrated femto with a four-port Ethernet gateway, VoIP port, USB connections, and a Wi-Fi router.

Many of the home networking companies are joining the race, with Netgear also offering a Femtocell Voice Gateway – a residential gateway with integrated ADSL2+ modem, router, 10/100 wired Lan switch, wireless access point, VoIP, firewall and 3G femtocell (also from Ubiquisys).

As well as pushing its product plans heavily, NEC aims to influence evolving femtocell standards too, and has joined with Kineto Wireless to propose a unified method of integrating femtos into the core. This follows the recent launch of the Femto Forum initiative to harmonize this aspect of the systems, which is currently fragmented between many largely proprietary options. NEC and Kineto are proposing a solution based on the 3GPP Generic Access Network (GAN), which in turn is centered on the Unlicensed Mobile Access (UMA) technology championed by Kineto. UMA has mainly been used for hand-off between Wi-Fi and cellular networks in dual-mode convergence systems, but can also be used for femtocells. NEC says that a fully defined ‘Iu-over-IP’ interface, as required by the Femto Forum, can be achieved with minor extensions to UMA. Kineto makes the UMA Network Controller (UNC), which forms the basis of a femtocell RAN gateway.

“The 3GPP GAN standard is a proven approach for extending Iu interface services over the internet to consumer owned devices,” said Patrick Tao, vice president of technology for Kineto Wireless. “It is the closest thing to a complete a 3GPP Iu-over-IP interface standard and provides a path to achieve that standard in 2008.”

The Iu-over-IP approach is one of two architectures expected to be taken through the standardization process, the other being SIP.