Alabama-based Synapse claims it has made it easier for OEMs to design mesh network software for embedded processors. It has adapted its Snap Pro wireless mesh networking protocol, which complies with the IEEE 802.15.4 standard for low power, low data rate wireless links, to run on multiple platforms, not just its own RF engine. It now runs on any RF module based on Freescale microcontrollers and further hardware will follow. Synapse uses an embedded virtual machine written in the Python language, and enables OEMs to create applications in minutes, instead of weeks. Snap Pro is an 802.15.4 mesh protocol that can be used as an alternative to more complex protocols like ZigBee, though Synapse also supports ZigBee, which is more complex to program.
Israeli start-up Celeno has shown off its first chip, a modified 802.11 baseband optimized for video. It is now sampling the CL1300, a 5GHz 802.11a/n media access controller, which it claims can deliver 34Mbps at the application layer over more than 120 feet and through multiple walls, at extremely low packet error rates. The chip uses a form of MIMO with beamforming and switching capabilities. The company will charge $20-$30 for the chip and should be in production by the end of the year. The device dissipates less than 3W and has an embedded microcontroller but requires a third party RF chip. The company is targeting set-top boxes, TVs and other home video devices. It will compete primarily with another Israeli start-up Amimon.
Freescale has unveiled a baseband accelerator chip for both WiMAX and LTE, which enables universal base stations with differentiated channel cards that deliver data rates at 100Mbps and higher. “Our baseband device replaces expensive FPGA or custom ASIC devices that base station manufacturers must use today,” claimed Barry Stern, multicore DSP manager at Freescale. When combined with a quad core DSP, the baseband processor could enable manufacturers to build scalable systems that support WiMAX, LTE and HSPA+. The chipmaker claims this is the first multi-standard baseband accelerator. It supports new Turbo and Viterbi decoding standards along with 2G and 3G networks; contains two configurable RISC engines, which can be reprogrammed for future standards and security algorithms; and has two high speed serial interfaces that can support up to eight lanes at over 3Gbps.
The worldwide microelectromechanical systems (MEMS) market topped $6bn and is growing at a compound annual rate of 14%, according to a study by Research and Markets, while another analyst firm, Yole Development of France, reports record growth among the top 30 MEMS manufacturers, based in part on higher accelerometer sales, up 300%. Hewlett Packard retained the top position by virtue of its MEMS inkjet printheads with $850m in sales. Texas Instruments and Robert Bosch were in second and third places; STMicro replaced Lexmark in fourth, based on increased sales of accelerometers used in products like Apple’s iPhone. Lexmark and Seiko Epson moving down to fifth and sixth, respectively and Freescale was seventh.