The Weightless SIG (special interest group) has had limited success in establishing its technology as a de facto standard for low power wide area networks (LPWANs). But it continues to push on multiple fronts for a significant role in the Internet of Things (IoT) and was vocal at last week’s CTIA show, announcing commercial products based on its newest specification, Weightless-P, which it claims can address a far wider range of LPWA use cases than the cellular solutions.
This push involves two of its three platforms (the first has been almost shelved as it focused on white space spectrum, which is not available in many countries). The other two are Weightless-N, an ultranarrowband (UNB) implementation based on technology from Nwave. This has been submitted to ETSI for its LTN (Low Throughput Network) initiative, which is also supported by the proprietary, but far more widely deployed, Sigfox.
This sees Weightless pulling back on providing the core technology for LTN, and instead aiming for a powerful role in coordinating interoperability certification for different UNB implementations under an LTN brand.
Its other platform is Weightless-P, whose origins lie in Taiwan-based M2Comm’s Platanus, though the vendor says the Weightless version is “Platanus on steroids”. This version still has an opportunity to become a de facto standards in its own right, say its supporters, because it is the only fully open, fully clean slate choice for LPWANs.
Unlike Weightless-N, it supports bidirectional usage (a shift which Sigfox also had to make to extend its targeted use cases and keep up with two-way rival LoRa).
At CTIA, there was new Weightless-P hardware on show from vendor Antenova. Called the Weightless Ignition Pack, it promises Weightless-P network connectivity out of the box and includes a base station, device modules, antennas and a full protocol stack, all for $1,500. A limited number of Weightless-P SDKs were being made available to developers at the show.
First announced in July 2015, the spec claims to be the only IoT option which is a completely ‘clean slate’ platform, with no proprietary technologies involved. This contrasts with the 3GPP’s NB-IoT standard, which was created with backwards compatibility in mind, turning against a ‘clean slate’ approach, for which vendors like Huawei lobbied.
The Weightless SIG argues that cellular-based IoT technologies are sub-optimal for most IoT applications. Legacy technologies, designed for telephony, will only satisfy applications where devices can have external power and be relatively expensive, in M2M terms, but more extreme cost and power efficiency requirements will need a specifically designed LPWAN, argues the Weightless SIG.
The PHY layer found in P differs to those in the other Weightless variants, and uses a more classical radio approach, with 12.5 kHz channels rather than the 200 Hz UNB approach of N. Weightless SIG chairman William Webb noted that it is currently difficult to say how the PHY will affect the BOM of P chips compared to N, noting that the P chips require a bit more silicon and software stacks, but that the volume of chip production was the bigger factor than the specification itself – hence why the relatively complex WiFi chips can be built at such low cost.
He added that if volumes were the same, both P and N chips would have a very similar BOM cost. And it’s not just the cost that is similar, as the SIG is aiming to ensure that all Weightless devices share the same application layer interfaces, so that developers have an easier time of it.
In addition to reducing complexity, this shared application layer also means that joint P + N networks could be built, perhaps with P devices acting as gateways for the more unidirectional traffic found in Weightless-N edge devices – an interesting proposition for developers or clients looking to deploy largescale hybrid use-case networks.
Webb added that Weightless was aiming to cater for 90% of the possible applications in the market, without pigeonholing itself into a particular niche- something he argues is impossible for cellular LTE Cat 1 and Cat 0 chips.
Derrick Wei, the CEO of M2Comm said “Weightless-P will breathe new life into an IoT market that is waiting on a reliable LPWAN technology. Many IoT sectors require reliability to be addressed with ultra-low energy wireless communications not accessible through operator services today. The slow adoption of wireless IoT solutions highlights a huge technology void that Weightless-P will address without requiring custom hardware. Our current technology deployments in the retail and industrial sectors are a powerful indication of the future success we anticipate for Weightless-P.”
Weightless-P’s specs:
Weightless-P will offer fully acknowledged uplink and downlink, using a narrowband modulation scheme in the sub-GHz ISM bands (typically 868MHz, 915MHz, and 433MHz) but also some of the more unusual bands like 470MHz and 780MHz). Idle state power consumption is listed as less than 100uW, with GMSK and offset-QPSK modulation.
Forward error correction (FEC), Automatic Retransmission Request (ARQ) and Adaptive Channel Coding (ACC) are listed as prominent features, and the protocol will support roaming for mobile applications. A 2km urban environment range is claimed, with the obvious caveat of longer range in more open or rural settings.
The FDMA+TDMA narrowband channels, 12.5KHz wide, support channel hopping to counter interference or noise, and aim to provide an adaptive data rate (ADR) ranging from 200bps to 100kbps at a maximal transmit power of 17dBm – allowing the devices to turn down the data rate to increase range, or increase the rate to send messages in a shorter time span, which can improve the free capacity of a network by allowing more devices to speak over a given period. Time-synchronized base stations for scheduling transmissions are also a feature that should improve spectral efficiency.
Adaptive data rates are one of the key features of Semtech’s LoRa protocol, and in this sense, Weightless-P is similar. Sigfox also offers a form of ADR, but with a lower upper threshold – and Sigfox and Weightless-N are the more comparable protocols, favoring more (but not always totally) unidirectional traffic, flowing from the edge to the center.
Another feature common to both Weightless-P and LoRa is the use of spread spectrum, although Semtech’s modulation is listed as proprietary in its data sheets, while the nature of Weightless-P as an open standard plus open hardware should appease more vocal or staunch supporters of open source platforms.