Your browser is not supported. Please update it.

10 April 2006

Go Networks joins metrozone mesh race

The burgeoning Wi-Fi mesh metrozone market has been the preserve of a handful of specialists, led by Tropos and BelAir, with some of the giants, such as Motorola and Nortel, taking an increasing interest as project sizes expand. With the urban mesh market broadening its remit beyond best effort access and public safety to complex, multilayered and multipurpose systems, there remains some space for new approaches, and Go Networks is the latest to try its luck ‘ no doubt also hoping to catch the eye of a giant as the large vendors wake up to this sector’s potential.

California-based Go came out of the shadows at last week’s CTIA show, launching its Metro Broadband Wireless (MBW) system, which is firmly targeted at the new generation of metrozones. First generation Wi-Fi meshes were data-only, single-radio and did not support mobile hand-off between access points, but now the industry is upgrading its wares to appeal to larger carriers, which want to provide the full quad play of voice, video, data and mobile hand-off. Such a mesh system should become robust enough to support alternative providers looking to break the stranglehold of the cellcos, but also provide the mobile giants themselves with a way to enter the metrozone market as they did the hotspot sector.

The approach of the MBW si to use rooftop or tower-mounted micro base stations with panel antennas offering 120-degree coverage and smaller picocells to fill in coverage gaps at street level. The picocells can form a mesh network using the 5GHz 802.11a for backhaul connections. Unlike similar systems that use WiMAX or a proprietary solution such as Motorola Canopy for the larger base stations, the MBW is entirely Wi-Fi based.

The MBW 2100 WLan Sector Base Station (WLS) uses xRF, Go’s implementation of the smart antenna technique, beamforming, to improve range and capacity and also avoid interference with neighboring networks ‘ important for regulatory approval.

Another component of the system is the MBW Wireless Network Controller (WNC), which manages the WLS and the pico base station (MBW 1000 WLan Pico Base Station or WLP) and links it to the backbone and to back office functions such as billing. There is also a Wireless Media Gateway, a subscriber unit for indoor use.

Finally, a technology called xCell has been created to optimized network and RF settings, routing, quality of service and load balancing.

There are similarities ‘ particularly in the use of beamforming and phased array antennas ‘ with the long range Wi-Fi switches sold by now defunct Vivato, but Go says its implementation is one-third of the price and 25% of the weight of those devices.

The company aims to start with trials in small cities and campuses to build confidence, and aims to lure operators with promises of cost per square mile that is 20-30% lower than other offerings, because of the efficiency of xCell and the smart antennas’ range boost. The first trial is with the Beijing University of Posts and Telecommunications for a campus application.

Although the current product is based on 802.11a, Go is a member of the WiMAX Forum and plans to add 802.16e to the mix in future, once subscriber units are cheaper or WiMAX is in laptops. It could apply the same beamforming techniques to WiMAX.