One of the measures of success for WiMAX will be the speed with which it achieves high volumes, which in turn will depend on low cost, usable consumer equipment. The laptop has been the key to the efforts to deliver that, and Intel has been the driver of the process, but other chipmakers are likely to get silicon for laptop-based and even mobile subscriber units into production before the giant. Wavesat last week announced the first reference design incorporating the MiniPCI standard, while fellow start-ups Sequans and PicoChip are racing ahead with mobile reference designs. And joining Intel and Fujitsu among the chip majors with an interest in 802.16 may be Freescale, which has acquired CommAsic, an innovator in OFDM technology.
Freescale was not specific about its reasons for buying CommAsic, but it did say it would gain baseband processing capabilities in OFDM which ‘can be leveraged across any OFDM-based technology such as wireless Lan, WiMAX, and Digital Video Broadcast (DVB),” according to Sumit Sadana, the chipmaker’s senior VP of strategy and business development. He did not, however, mention another OFDM technology, Multiband OFDM, which is the basis of the WiMedia Alliance’s proposed standard for UltraWideBand-based personal area networks. This specification is a rival with Freescale’s own Direct Sequence UWB design to be a standard for high data rate home networks. Although Freescale has had some recent success with consumer electronics manufacturers, it is likely that the WiMedia platform will become the most widely supported platform in the industry and Freescale will then face the choice of whether to support the technology in order to stay in the UWB mainstream.
CommAsic has specialized in creating a software programmable baseband architecture, WBSP, that is sufficiently low power to be suited to handsets but also supports broadband wireless applications. It has mainly been targeted to Wi-Fi so far.
As promised, WiMAX chipmaker Wavesat has announced the first 802.16 reference design incorporating the MiniPCI standard, which will be important in bringing WiMAX to low cost and laptop-based devices.
With many vendors focusing their efforts to create a laptop-based subscriber unit purely on the forthcoming 802.16e mobile standard, Wavesat’s move is also important to strengthen the existing 802.16-2004 fixed wireless specification, which will be able to support portable PC-based access though not hand-off between base stations. Some observers believe this standard will be sidelined once 802.16e equipment debuts, but Wavesat, along with other companies like TeleCIS, believe that there is considerable potential to enhance the fixed specification to support attractive business models incorporating portability and VoIP.
The development of a WiMAX MiniPCI module is a major step towards low cost and small form factor subscriber equipment, says Wavesat, which is working with some of the high volume Taiwanese manufacturers on its platform.
The new 3.5GHz MiniPCI Design, based on Wavesat’s Evolutive architecture, is a development platform to enable OEMs and ODMs to create WiMAX units, offering them a plug-and-play predefined solution for the PHY and MAC layers. The Mini-PCI standard format simplifies the overall WiMAX subscriber unit design, enabling vendors to bring products to market more quickly and cost efficiently.
‘Wavesat’s WiMAX MiniPCI design provides the solution our customers need to drive the CPE cost down and enable broad WiMAX market adoption,’ says Michel Guay, CEO of Wavesat. ‘Low cost and short time to market are decisive factors in an emerging market where plenty of applications are awaiting a solution.’
“The market is at a stage now where it can go to high volume,’ said Vijay Dube, vice president of business development. He expects Asian ODMs to quickly ramp up the volume of WiMax gear and drive down costs.
Based on the company’s DM256 physical-layer baseband, the reference kit marries it with an RF Magic front end for 3.5GHz operation. The company will support the media access control (MAC) layer in software. Wavesat is also working with SiGe semiconductor for an RF front end.
Wavesat’s reference design supports the WiMAX profiles included in the first round of Forum certification ‘ 3.5GHz with 3.5MHz bandwidth and support for either TDD or FDD operation.
WaveSat believes the first wave of customers for WiMAX, the broadband wireless equipment makers, will be joined in the early part of 2006 by original design manufacturers, especially from Taiwan, which will start to bring down costs rapidly. Alpha Networks of Taiwan is already planning to combine Atheros Wi-Fi chips with a Wavesat-based MiniPCI WiMAX card for hotzone applications, according to Wavesat. The chipmaker is targeting the Asian ODMs more aggressively, at this early stage, than most rivals and Asia is its largest market. Among its publicly announced customers are Wave-IP, Waverider, Nex-G, Trango and China Electronics System Engineering (CESEC).
Over at France’s Sequans, the company plans to deliver a WiMAX chipset suitable for portable devices such as handsets and laptops in the first half of 2006. It aims to be the first with such a device, promising PDA-suitable low power levels of 350 milliwatts in active mode, and under 10 in sleep mode.
Its first products are the SQN2010 and SQN1010 baseband-plus-MAC chips for basestations and CPEs, respectively. RF front end partners include Sierra Monolithics and RF Magic. Both chips perform a variety of MAC functions in hardware to offload the ARM processor. Additional function support provided by the ‘2010 include subchannelization, space-time coding and maximal ratio combining. ‘Most [companies] are only talking about supporting these, but no one has done it yet,’ said the company.
And UK base station chip designer picoChip, which provides the technology for Intel’s forthcoming WiMAX base station platform as well as for Airspan, has announced a family of complete reference designs that extends its offering to cover 802.16e and Wi-Bro as well as fixed WiMAX, and to the subscriber unit.
The designs all use the PC 102 processor and implement the four different platforms in software. The company has added the PC6530 mobile base station and PC6620/6630 designs for support of both fixed and mobile subscriber stations, to its existing PC6520 802.16-2004 base station chipset. It also supports advanced features that will be included in the current or future 802.16 standards. These include multiuser sub-channelization for 802.16d, multiple subcarrier allocation modes for 802.16e, STC (space time coding) and antenna diversity, as well as an upgrade path to deliver AAS (active antenna systems) or MIMO smart antenna arrays.