Your browser is not supported. Please update it.

20 March 2006

Purewave brings configurable processors to WiMAX

In the effort to put WiMAX ahead of its rivals, and broadband wireless in general ahead of wireline alternatives, some previously obscure semiconductor techniques have moved into the mainstream to boost the raw performance of these networks. One such technique is the configurable processor (CP), now being turned to the service of turbocharged WiMAX by, among others, Silicon Valley start-up PureWave Networks, a three-year old fabless chipmaker.

A CP aims to combine the strengths of a single-purpose ASIC chip ‘ high performance but inflexibility and high cost ‘ and an FPGA (field programmable gate array), which allows the chip to be adapted for different purposes or upgraded in the field. They offer the first time that a core processor can be altered after design or fabrication. Designers start with a fairly generic processor and can then change it by adding instructions into te IP core to customize it for a particular purpose, such as video compression. Further instructions can be added or changed at a later stage.

Configurable cores have been around for well over two decades, but until late 2004 their only high profile win was with Nintendo, which licensed one as the graphics accelerator for its Super Nintendo console. However, the need to increase performance at ever faster rates, while reducing cost and risk, has increased interest in CPs in the past year or so, especially in the wireless arena.

With CPs promising to reduce component count, boost performance and reduce chip redesigns, the five main manufacturers in the space – Actel, ARC International, eASIC, Stretch and Tensilica ‘ are taking on the makers of more traditional ASICs, digital signal processors and speciality core processors, such as ARM, Intel and Texas Instruments.

PureWave uses the Stretch S5000 CP, which can be reprogrammed using standard C or C++ code, with instructions added to the IP core at any stage in the chip’s life. The processor is more off the shelf than most CPs, and so can be used as a conventional product and then reconfigured later.

Purewave has incorporated this product into its own software defined radio (SDR) architecture for broadband wireless networks, notably WiMAX. It recently demonstrated its SDR, which aims to provide an off the shelf radio and chipset for WiMAX, which can be adapted purely in software, using standard tools, as new algorithms and changes to the 802.16 standard and profiles arise. This is far less risky than implementing WiMAX with traditional ASICs, argues Purewave, and developers can implement customized extension instructions which accelerate hardware processing but are accessible through software. This, claims Purewave, enables a single extension instruction to perform the equivalent of hundreds or even thousands of operations on a traditional processor.

By using a small number of extension instructions to replace many operations, performance of 802.16-2004 chips can be increased by 28%, claims the start-up.

Software configurable processors are increasingly at the heart of wireless development, with various techniques in use by pioneers such as PicoChip to support rapid and cost effective changes and updates to systems ‘ a critical necessity with an immature technology like WiMAX that will go through many changes and updates in the coming two years.