Your browser is not supported. Please update it.

2 April 2008

TI unveils multi-standard base station DSP platform

Texas Instruments is doing its bit for the cause of flexible base stations that will support multiple standards, reducing OEM and carrier risk. The chipmaker has unveiled a development platform that supports multiple carriers and multiple standards on a single channel card.

The platform is based on two multicore DSPs (digital signal processors), the TMS320TCI6487 and TMS320TCI6488, plus multi-interface software libraries. It covers GSM/EDGE, HSPA/+, China’s TD-SCDMA, LTE and WiMAX and supports both MAC and PHY layer processing. All standards are supported with DSPs alone, except WiMAX, which still requires a more expensive and power consuming FPGA (field programmable gate array).

TI claims its platform reduces operator capex by supporting the highest number of carriers per channel card and allowing new networks or features to be added using the same baseband hardware. It expects operators to use the platform now for UMTS/HSPA and upgrade to HSPA+ or LTE on the same hardware in future, and even in some cases for GSM/EDGE providers to upgrade straight to LTE or WiMAX, a key application in markets where 3G licenses have not been allocated and operators may look to move straight to 4G down the track (for instance, parts of South America or sub-Saharan Africa). In China, the platform will support an upgrade from TD-SCDMA to LTE-TDD.

The DSPs at the heart of the product use TI’s TMS320C64x+ core and, except in WiMAX, do away with FPGAs or microprocessors by using on-chip accelerators. Both DSPs incorporate the standard base station interfaces, OBSAI and CPRI, which allow direct connectivity over the backplane to a RF transceiver card or remote radio head.

The first product based on the new platform is the AMC-6487 common baseband card from CommAgility, which will be available later this quarter.