Your browser is not supported. Please update it.

23 April 2007

WiMAX Forum looks forward to 802.16m

There has been some confusion of late over the role of the future update to the 802.16 standard on which WiMAX is based, 802.16m. WiMAX Forum president Ron Resnick has been keen to stress situations where future WiMAX variants could take a position in a broader 4G platform, and gain approval from key cellular standards bodies like the 3GPP. Meanwhile, the IEEE, which creates the 802.16 specifications, has been careful to say that 802.16m would not necessarily equate to WiMAX – it would have to be adopted and approved by the Forum first. In theory, the technical deliberations over 802.16m should not be over-influenced by the commercial needs of the WiMAX industry, though in practise the two are virtually inseparable (WiMAX profiles are subsets of the 802.16 standards, but the Forum is the only major ‘customer’ for these IEEE standards.)

Resnick has been trying to clarify the situation a little in recent interviews and told WiMAX Vision that “802.16m is WiMAX and always will be”, He says that the WiMAX brand will be a constantly evolving standard that will certainly incorporate the 802.16m air interface enhancements once these are approved, strengthening its position in mobile broadband.

Although he would like WiMAX to work more closely with cellular bodies and with larger standards organizations like ETSI – and to be approved as an official 3GPP technology so that it can be used in bands specified for 3G – he does not see it converging fully with the UMTS/LTE roadmap. Instead, he sees the two platforms competing for carrier attention, despite their technological similarities, and claims WiMAX has a significant headstart even in its current 802.16e-based form.

Part of WiMAX’s advantage, Resnick said, is that the Forum expects 802.16m to be backwards compatible with 802.16e, an advantage that has helped the various generations of CDMA in the past, but which does not apply to the GSM-UMTS route. There is also significant operator pressure for LTE to have a backwards compatibility with UMTS/HSPA.

One of the key enhancements 802.16m offers is greater scope in terms of channel bandwidths than 802.16e, with support for 20MHz and even 40MHz channels and a greater focus on FDD mode, for which large swathes of spectrum are available worldwide.

Based on using enhanced OFDMA and antenna techniques (including 4×4 MIMO) in wider channels, Resnick expects 802.16m to deliver highly competitive performance. “The peak data rate in the downlink will be three times as much. For a 20MHz sector the peak data rate in the downlink in 802.16e is 128Mbps, it will be in the order of 350Mpbs in 802.16m. In the uplink, per sector it is 28Mbps in 802.16e, it will be 200Mbps in 802.16m. Mobility in 802.16e is 60-120 kilometers per hour, in 802.16m it will be up to 350kmph, which covers trains,” he explained to WiMAX Vision. There will also be greater sensitivity to support corporate class VoIP, and greater spectral efficiency than in 802.16e.