The Weightless SIG has revealed the first look at its latest protocol to target the IoT networking space, with the unveiling of Weightless-P – a sub-GHz protocol that aims to provide the bidirectional functionality that isn’t provided or prioritized by the Weightless-N standard.
Following the origin model used in Weightless-N, which is almost entirely based on technology contributed by Nwave, Weightless-P is mostly derived from the portfolio of M2Communication (M2Comm) – a Taiwanese business that provides a protocol called Platanus that provides a very similar list of capabilities as Weightless-P.
M2Comm likened its contribution to Weightless as “Platanus on steroids,” with some similar aspects but “some tweaks and new features added to achieve reliable, bi-directional 2km range in a cluttered urban environment.”
While Weightless-P is a pre-standard protocol, which has to go through the usual channels and review processes associated with standards organizations, Weightless SIG CEO William Webb is confident that the protocol will be ratified and approved by the end of the year – and said the group is open to contributing it or joining with other standards bodies, if it would be advantageous. The first Weightless-P hardware is expected in early 2016.
Speaking to Webb ahead of the announcement, he said that P was filling a gap in the standards the SIG offers – which also includes the TV whitespaces focused Weightless-W, which has effectively been abandoned following the slow progress associated with global spectrum allocation projects and the differing national TV bands which made settling on a standard difficult. The acquisition of lead developer Neul by Huawei didn’t help things either.
At the chip level. Webb also said that the PHY layer found in P differs to both N and W, and uses a more classical radio approach, with 12.5KHz channels rather than the 200Hz UNB (ultra narrow band) approach of N. Current SoCs should be suitable for the new protocol.
Webb noted that it is currently difficult to say how the PHY will affect the BOM of P chips compared to N, noting that the P chips require a bit more silicon and software stacks, but that the volume of chip production was the bigger factor than the specification itself – hence why the relatively complex WiFi chips can be built at such low cost.
He added that if volumes were the same, both P and N chips would have a very similar BOM cost. And it’s not just the cost that is similar, as the SIG is aiming to ensure that all Weightless devices share the same application layer interfaces, so that developers have an easier time of it.
In addition to reducing complexity, this shared application layer also means that joint P + N networks could be built, perhaps with P devices acting as gateways for the more unidirectional traffic found in Weightless-N edge devices – an interesting proposition for developers or clients looking to deploy largescale hybrid use-case networks.
Webb added that Weightless was aiming to cater for 90% of the possible applications in the market, without pigeonholing itself into a particular niche. Aiming for general usage, Weightless is leveraging the fact that MNOs have realized they face a shortfall in the short term where cellular can’t provide for them. The cellular advocates will point to LTE Cat 1 and Cat 0, but we have only just seen the first Cat 1 devices to make it to market, from Sequans, with Cat 0 further off.
As for performance, especially compared to its LPWAN rivals, we’ll have to wait and hear from engineers out in the field and labs. Initially, Weightless-P looks very comprehensive on paper, but that has to translate into real-world performance for it to take off.
The spec itself:
Weightless-N has now been deployed in London and two Danish cities (Copenhagen and Esbjerg), admittedly at very small scale, but it is early days for the new protocol. Nwave has more extensive deployments of the technology that preceded Weightless-N, and M2Comm also has established deployments of its Platanus protocol – which shares a lot of characteristics with Weightless-P.
Weightless-P will offer fully acknowledged uplink and downlink, using a narrowband modulation scheme in the sub-GHz ISM bands (typically 868MHz, 915MHz, and 433MHz) but also some of the more unusual bands like 470MHz and 780MHz). Idle state power consumption is listed as less than 100uW, with GMSK and offset-QPSK modulation.
Forward error correction (FEC), Automatic Retransmission Request (ARQ) and Adaptive Channel Coding (ACC) are listed as prominent features, and the protocol will support roaming for mobile applications. A 2km urban environment range is claimed, with the obvious caveat of longer range in more open or rural settings.
The FDMA+TDMA narrowband channels, 12.5KHz wide, support channel hopping to counter interference or noise, and aim to provide an adaptive data rate (ADR) ranging from 200bps to 100kbps at a maximal transmit power of 17dBm – allowing the devices to turn down the data rate to increase range, or increase the rate to send messages in a shorter time span, which can improve the free capacity of a network by allowing more devices to speak over a given period. Time-synchronized base stations for scheduling transmissions are also a feature that should improve spectral efficiency.
Adaptive data rates are one of the key features of Semtech’s LoRa protocol, and in this sense, Weightless-P is pretty similar. Sigfox also offers a form of ADR, but with a lower upper threshold – and Sigfox and Weightless-N are the more comparable protocols, favoring more (but not always totally) unidirectional traffic, flowing from the edge to the center.
Another feature common to both Weightless-P and LoRa is the use of Spread Spectrum, although Semtech’s modulation is listed as proprietary in its data sheets, while the nature of Weightless-P as an open standard plus open hardware should appease more vocal or staunch supporters of open source platforms.
As for the political side of things: Sigfox is a proprietary protocol available on a wide range of third party hardware, with a per-device subscription paid to Sigfox; LoRa positions itself as an open standard, but to use it requires using Semtech silicon, or chips from a supplier that will be paying a royalty or license to Semtech; and membership of the non-profit Weightless SIG entails a fee/royalty too – admittedly only £900 p.a.
Nothing is entirely free in the IoT, or any industry for that matter, but Weightless P and N look more open than the leading two LPWAN technologies. Weightless posits that it provides for multivendor support and ensures interoperability between manufacturers, so that its users have a choice of silicon and devices – with royalty free IP.
Derrick Wei, the CEO of M2Comm said “Weightless-P will breathe new life into an IoT market that is waiting on a reliable LPWAN technology. Many IoT sectors require reliability to be addressed with ultra-low energy wireless communications not accessible through operator services today. The slow adoption of wireless IoT solutions highlights a huge technology void that Weightless-P will address without requiring custom hardware. Our current technology deployments in the retail and industrial sectors are a powerful indication of the future success we anticipate for Weightless-P.”