You only have to open up a smartphone and count the individual chips to see the vast potential for silicon vendors. Each component represents an area of competition, and now with the looming emergence of wearables, those component manufacturers will find even more opportunities for their chips to end up inside a smartwatch, wristband or head-mounted unit – as well as the plethora of Internet of Things (IoT) related applications that might require technology born of smartphones and industrial devices.
Teardowns of the new Apple Watch serve well to illustrate this point. The high-end or luxury wearable (costing between $400 and $18,000), is packed with silicon – needed to provide the motion sensitive and health tracking functionality of the wrist-mounted wearable.
But swirling reports suggest that demand for the Apple Watch has plummeted since launch, when Apple is widely thought to have sold between 1-2m watches. Slice Intelligence now thinks that Apple is selling less than 20,000 watches a day, down from 200,000 daily in the first week – a 90% drop in demand. Slice also thinks that the cheapest watch, the $350 Sport, makes up more than two-thirds of sales, and that Apple has sold less than 2,000 units of its golden $10,000 Edition.
Slice noted that on some days Apple sold less than 10,000 watches, but if we average that out for a year (365 days) at $350 a unit, the watches still represent a $1.27bn business per year. If the figure is nearer a 20,000 daily average, then it’s up to around $2.5bn – and that’s before you factor in that two-thirds of sales are accounted for by watches that cost between $500-$1,000, and add in the launch spikes. Those are still healthy figures for such a nascent form factor.
All in all, the Apple Watch system fits some 30 components into a package measuring 26mm x 28mm – an impressive feat according to Chipworks, which adds that “some of those components contain multiple die, with the package-on-package assembly for the Apple processor and DRAM die. There are over 30 individual components, and at least 30 pieces of silicon.”
The main unit itself, called the S1 (for System-in-Package), contains:
- The Apple APL 0778 main processor, built on the 28nm Samsung process and measuring 5.2mm x 6.2mm.
- A Broadcom BCM43342, handling 802.11 b/g/n WiFi, Bluetooth 4.0, and NFC.
- Skyworks WiFi LNA and PA.
- An AMS AS3923 NFC signal booster.
- A NXP PN548 NFC controller
- A STMicroelectronics accelerometer and gyroscope sensor.
- A STMicroelectronics STM32 MCU.
- An ADI AD7149 touch controller.
- An IDT P9022 wireless charging controller.
- A Dialog Semiconductor D2248A Power Management Unit.
- A Texas Instruments OPA2376 operational amplifier.
- Maxim audio codec, and audio amp. Chipworks notes the displacement of Cirrus, which was incumbent on iPad and iPhone designs.
- 4GB of Elpida F440AAC SRAM memory.
- 8GB of Toshiba or Sandisk flash memory.
ABI notes that the win for ADI’s touch controller and IDT’s wireless charger were surprises, with the Apple Watch one of a few recent wins for ADI that marks a return to form of sorts, after a few years in the wilderness.
“The design is an obvious variation from Apple’s smartphones, with many high-end functions and chips included that would not normally be found in a simple watch,” said Jim Mielke, VP Engineering at ABI Research, and the head of the TeardownIQ group. “Judging by the complexity of the PCB, and the number of parts on the PCB, one might think that the Apple Watch is a fully-fledged cellular connected watch – when in fact connectivity is limited to Bluetooth, WiFi and NFC.”
A separate teardown video from iFixit showed the complexity involved with disassembling the miniature design, and in so doing put to rest any thought that the watch could allow an Apple Store to easily upgrade the internal components. This was one argument that justified the five-figure price of the gold Apple Watches, but it is pretty clear from the video that it is far from hot swappable.
Prizing the S1 chip out of a housing of resin, as well as removing some soldered contact points, was required to get access to the chip. Consequently, if an upgrade path is offered by Apple, it will almost certainly be a complete replacement of the watch unit – as owners could probably keep the strap.
Removing the strap was the only non-destructive step in the process – a practice that is increasingly common in smartphones, where the drive for ever-smaller devices has led manufacturers to begin gluing components together rather than using removable screws.
IT took iFixit 20 steps to remove the S1, using its own special collection of tools that the company sells to its viewers looking to repair or upgrade their own electronics. With regard to iFixit, Apple has a rather poor reputation when it comes to DIY-friendliness – which is why the iFixit kits contain new adhesive strips and bespoke wedge-prizers rather than small screwdriver heads.
Pulling apart the screen revealed an Analog Devices AD7166 ARM Cortex-MB based touchscreen controller as well as a behind-display light-level sensor. The display itself is likely a Plastic AMOLED screen from LG.
IHS Research has also weighed in on the Watch recently, declaring that Apple is enjoying very high margins on its cheaper models. IHS says the BOM cost of the cheapest watch is around 24% of the retail price at just $81.20, selling for $350. Other Apple devices examined by IHS have scored between 29-38% of the retail price, with the ratio changing as devices move into sales and incentivized offerings.