ARM’s tightening relationships with chip foundries are particularly important in the emerging internet of things (IoT) markets, where massive scale and rapid time to market will be vital for the success of its processor architecture and its licensees.
A couple of weeks after announcing new physical IP, geared to the IoT and co-developed with foundry UMC, ARM has announced another design, this one created with the world’s largest foundry, TSMC. The companies have unveiled an IoT subsystem for ARM Cortex-M microcontroller cores, which they claim will simplify the design of chips for use in smart devices.
The subsystem IP block uses ARM’s Artisan physical IP and is optimized for TSMC’s 55nm ultra-low power process with embedded flash memory, to reduce size and cost, and push power consumption below one volt.
The block is individually licensable, but works with a Cortex-M and radio IP from Cordio, to create a readymade IoT chip platform into which sensors and peripherals, such as flash memory, can be integrated easily. For connectivity, the subsystem is optimized for Cordio’s Bluetooth LE but can also work with WiFi and 802.15.4, while it is also designed to work with ARM’s mBed OS software for the IoT.
“With industry expectations of hundreds of billions of new smart connected sensors by 2030, we see a demand for highly customized chips,” said James McNiven, ARM’s general manager of systems and software. The ARM IoT subsystem “enables our partners to focus finite resources on the system functionality that differentiates them in their market,” he added.
TSMC launched the first ultra-low power process platform from a foundry last September, to meet emerging demand for chips for the IoT and wearables. The 55nm to 40nm node is suitable for applications with low data rate and low power consumption, such as smart home lighting or metering.
The Artisan physical IP on a 55nm process was also the focus of ARM’s recent launch of physical IP with UMC, as foundries become increasingly strategic to it. Like the TSCM development, the UMC ultra-low power offering is designed to help chip designers accelerate and simplify the creation of ARM-based system-on-chip products for energy efficient IoT application.
Physical IP is increasingly important to ARM’ s finances – although it only accounts for a single-digit percentage of total revenues, it has been growing at around 15% a year. It contributed $24m in licensing fees, $17.2m in royalties and two new licensees to its most recent quarterly results.
In its last quarter, ARM for the first time recognized physical IP royalties from a FinFET (3D transistor) process, but IoT applications are often not about the smallest geometries and are driving new pipelines for foundries’ 55nm and other processes. In UMC’s case, Artisan should improve the power efficiency of its broader ULP (ultra-low power) technology platform. It claims to save up to 44% of dynamic power and 25% of leakage power compared to older processes.
Artisan’s thick gate oxide library reduces leakage by a claimed 350 times, and can interface with the higher battery voltages used in many IoT devices, which can remove the need for a separate voltage regulator.
ARM runs a Processor Foundry Program which enables fabless chipmakers to access ARM processor technology directly via a three-way partnership with an approved foundry, accelerating time to market, especially for smaller players which may lack strong foundry relationships.