Your browser is not supported. Please update it.

19 June 2015

First Weightless-N network goes live in London, Nwave and Arkessa partner

The Weightless SIG has announced this week that the first Weightless-N low-power wide-area network (LPWAN) has been established in London. The new Weightless-N protocol, the first version of which was released in May, based almost wholly on technology from Nwave, now powers a network deployed in partnership with the UK’s Digital Catapult program.

The government-backed Catapult has provided the roof infrastructure that secures the single Weightless-N base station. While initially very small, this deployment is more a test bed rather than a commercial venture, but the involvement of the Digital Catapult organization should open up this new platform to lots of the smaller startups that are involved in the program – which is backed by funding from the Innovate UK project.

That single base station should cover most of London’s well-known landmarks, based on network modelling, but many more sites will be needed to guarantee coverage for the wiser London metropolitan area – which encompasses some 8,000km2 and 21 million people.

In terms of network coverage, high population density is both a blessing and a curse. In terms of network architecture, having all those people and their associated devices within a small geographic area means that you can cover more ground with fewer antennas. Conversely, that density means that you need to carefully manage or provision the network traffic to ensure that you don’t overload the base stations and cause outages.

If you built a network that served 21 million devices in that 8,000km2 area, for instance, the timing of the device message sending would need to be coordinated in such a way that all (or too many) of those devices don’t try to speak to a base station at the same time. If blocks or categories of devices are told to upload a status indicator at one minute intervals, that would allow you to segment the workload into (theoretically) 60 blocks. Seconds, half-seconds and micro-seconds would allow you to reduce the sizes even further, but of course, network and device latency, as well as the time taken to process a communication, will eventually impose an upper limit on that.

Another way to manage the volume of communications is to give the end-device some level of intelligence, so that it can work out if it has the space or bandwidth to send data to the base station. This approach could be more resilient, with the ability to be dynamically adjusted, but it will likely cost more to build and use more power during its lifetime.

As with all emerging IoT applications, deployments are all a matter of swings and roundabouts – using tradeoffs to achieve the best possible outcome. If Weightless only needs to add more base stations to increase capacity, then expansion is fairly straightforward. But if the urban canyons of dense city deployments, or an awkward deployment leads to areas of poor quality connections, then more innovative solutions will have to be applied – as roof-mounted units would have hit a wall.

Regardless of future hurdles, which all substantial LPWA network deployments are eventually going to encounter, the Weightless SIG says it will be commissioning independent network quality tests and publishing the results on its website shortly.

The Weightless-N protocol itself operates in the unlicensed ISM band, 868MHz in the UK, and uses differential binary phase shift keying (DBPSK) modulation to send data in narrow bands of that frequency. AES 128-bit encryption is standard, and the message routing structure allows a single base station to serve multiple networks at a time – potentially allowing multiple private networks to share the same infrastructure, while enabling devices to roam between base stations.

The group claims that its base stations can cost as little as $3,000, with end devices needing only $2 of connectivity hardware to be connected. We’ve yet to hear of a commercial adopter, but the SIG is offering the open-standard to base station and end-device terminal developers on a royalty-free basis.

The open approach should provide the standard with plenty of interest from potential adopters, and William Webb, the CEO of the SIG said “open standards are simply better for developers. They minimize cost, increase choice, mitigate risk, encourage innovation and are sustainable. History unequivocally shows that only open standards ultimately prevail in the wireless technology space.”

“We are delighted to be able to provide a platform to showcase Weightless-N technology, a key enabler for smart city projects not just across the capital but across the world,” said Peter Karney, head of engineering at Digital Catapult. “We are looking forward to opening this up to our network to enable them to continue to showcase the UK’s innovation in this area; we will be leading a call in the near future allowing these innovators to register their interests in the project.”

Nwave and Arkessa partner for IoT expansion:

When Nwave joined the Weightless SIG back in October 2014, it donated its narrowband ISM implementation to serve as a reference model for the development of Weightless-N. The suffix is the clue to the protocol’s origins, based almost wholly on Nwave technology, largely due to the SIG’s decision to move away from its previous attempts at using TV White Spaces spectrum in favor of the ISM bands – which are easier to rollout out globally, as TV spectrum allocations differ to a much greater extent per-country compared to ISM bands.

This week, Nwave has announced a partnership with Arkessa – a M2M and IoT service provider, which helps allow organizations to remotely monitor and manage devices. Arkessa has been supplying M2M services since 2002, in a number of different sectors, using “single and multi-network, non-steered roaming, SMS, CSD, GPRS, 3G, 4G, Satellite and emerging communications technologies across the globe.”

Evidently, Nwave is the latest in the “emerging” sector, and the deal adds LPWAN to Arkessa’s portfolio of connectivity options. The M2M platform is managed through the company’s Ark software and EMPort (Estate Management) dashboard, allowing web-based interactions with the data and devices – whether that means monitoring meter readings, or remotely operating HVAC systems.

“Arkessa is committed to rapidly integrating the best-of-breed technologies for our customers and partners to connect to the Internet of Things, enabling them to interact with and gain insights from their devices wherever they are in the World and however they connect.” said Andrew Orrock, CEO of Arkessa, “Nwave are leaders in LPWA and the combination of their ultra-narrow band radio protocol and software defined radio enables us to target high density, low maintenance networks of sensors and devices.”

“We are able to rapidly deploy LPWA networks and solutions, and are excited to partner with Arkessa on projects as diverse as Smart Agriculture, Smart Parking, Environmental monitoring, Social Housing and of course enabling the Smart City.” Said Jonathan Wiggin, Managing Director of EMEA at Nwave. “Arkessa has a vision for the future of IoT connectivity that we share, making solutions that deliver rapid return on investment easy to deploy, and open up the potential of the IoT for the World. Together we are making the benefits of the IoT as accessible as possible to as many as possible.”