It makes sense doesn’t it; speaking your commands to your home. Telling the lights to turn off, asking if the washing machine has finished, and queuing up the next album to play on your whole-house audio system ‘ these all seem like sensible things you might use a voice controlled smart home to do, all without having to physically interface with a hub, phone or wearable. It’s the hands-free convenience that is the killer app for this technology.
Add to this the fact that speech recognition can be used as an authentication tool for verifying the user and validating commands and it looks like voice is the perfect primary interface between a user and a home. A number of useful applications spring to mind, including zones or rooms where voice commands can only be given by one voice ‘ so that kids can’t turn off their parent’s computers in the home office, or so only adults could access the tool cabinet in the garage or the medicine or liquor cabinets.
In many ways, a voice is more secure than a keypad or hub, assuming that the voice recognition is accurate enough. Anyone could watch you punch in the code to open the front door, but the two factor authentication made possible by a phone in the pocket and a spoken command (‘Open Sesame!’) could be a much more secure than our somewhat archaic (but admittedly reassuring) key fobs.
In fact, it’s hard to think of a better way to seamlessly operate the ‘things’ that you connect to your smart home ecosystem. On the assumption that you can always be heard by the home, talking aloud is a far simpler process than speaking into Siri or asking your Galaxy Gear. So how can you ensure that the home can hear you?
Well this week we’ve seen a couple of things that pave the way for this experience, and first we’ll look at the hardware and architecture side of it. MiPow has released its Playbulb in the UK, a smart light bulb that also integrates a Bluetooth speaker. While not the first such device, it does show how a home can be quickly set up to both talk to and listen to the user in a home.
The Playbulb doesn’t require a docking station, unlike some of the more expensive alternatives like the Audiomotion or GiiNii Audiobulb, and simply screws into an existing light fitting and talks to a phone over Bluetooth. It costs £60 ($102) for one bulb, but other brands such as Hasled should look into filing a few patent or copyright infringement cases given the plethora of £20 bulb-speakers available on eBay and Amazon from China that exactly resemble the £80 Hasled 9 Watt BC bulb. Currently, there are no big names in the bulb-speaker market but we’re not sure this will last.
But the models themselves aren’t particularly important; it’s the concept that is exciting for the smart home. A system like this in its current guise allows the existing home hub set up to speak to a user in any room that contains a bulb. It can notify the whole house that the dryer is done, that the oven timer has finished or that the front door has just been knocked. That’s all well and good, but it’s the next generation that could really push the smart home into new areas. What if you stick a microphone in one of these bulbs?
Now the bulb can both play and receive audio before relaying that off to a hub over any number of wireless protocols widely used in the smart home. This lets a user interface with the home from any room with a light fitting, without needing to have a device on their person. A motion sensor in the bulb might be handy to let the home track where the user is talking from and activate the microphone ‘ although we do admit that cramming a lot of stuff into a light bulb might get in the way of the device carrying out its primary function.
The benefits of using a light socket as the installation point for a smart home interface are fairly obvious. Power is already there so you don’t have to worry about battery usage, every home thinking about going smart will have plenty of light fittings already installed, and for the consumer at least, it’s pretty much a matter of plug and play usability ‘ go to store, buy hub and bulbs, plug in.
Now we don’t think for a minute that these bulb-speakers will garner the interest of any audiophiles, so we think that the speakers could be seriously downgraded and still perform as a functional home-voice, bringing the BOM cost down substantially ‘ and enough to make incorporating a basic motion sensor and microphone a simple enough task at a compelling price point.
And on the software side of things, Microsoft has just announced that its Windows Mobile voice assistant Cortana can be used to control Insteon’s range of bulbs, and presumably in the near future the entire range of products, which includes IP cameras, energy monitors and safety sensors. While the system is currently in alpha testing, it has beaten Apple’s Homekit and Google’s Now and Nest projects to the market in terms of making voice the tool used to control a smart home.
But if this is the first step, of talking to a device, the next step is simply rolling that functionality into the home itself. The technology to do so is certainly ready, but it remains to be seen if the market is accepting of having a home always listening for commands.
When it was announced that the Xbox One’s Kinect would always be listening for user voices, even when the console was powered down, a massive fan backlash forced Microsoft to shift that feature from being mandatory and turn it into a user-enabled option. While Microsoft’s intention may have been innocent enough, an attempt to streamline turning on a console rather than an attempt to data-mine the living room, the hostile response showed the unease that many consumers felt about letting their home listen to all their conversations on the off-chance it was needed. It remains to be seen if such fears will be voiced if one of the major smart home players launches a system like the one outlined above.