It’s been a constant in the silicon business for some time now: reducing the die-size of a chip will bring about improved power efficiency. Consequently, mobile and desktop/server processor manufacturers have been racing towards ever smaller nanometer measurements, but the IoT won’t exactly mirror this path.
Not all IoT devices are about tiny geometries. Stuart Forbes, Freescale’s digital networking manager, said in an interview that the firm has no current plans for 10nm, and that it will be several years before it can make microcontrollers in 16nm because it is extremely difficult to implement flash and analog elements in this technology. 16nm in mobile and desktop chips required the FinFET process, which allows transistors and memory to be stacked – achieving greater density and a smaller footprint.
But IoT chips will not follow the single-track route of mobile processors, ever-downwards in geometry terms, but will have far more diverse requirements. For instance, TSMC and other foundries have seen a rejuvenation of their 55nm businesses thanks to the IoT – the 55nm to 40nm node is well trusted and reliable, and is very suitable and cost-effective for slow data rate, low power applications such as smart home lighting and metering, where battery life of up to one year is desirable.
However, die-shrink makes for better headlines, and Freescale’s new smaller architecture has generated the most headlines. The company’s next generation of multicore processors will use a 16nm FinFET process, it announced, with two of them – the QorIQ LS1048A and LS1088A, being targeted at edge networking gateways for the IoT (an important application also hotly pursued by Intel). Due to arrive mid-2016, they will run on eight 64-bit ARM Cortex-A53 cores running at 1.5 GHz.
The 16nm process will provide twice the performance of the current 28nm generation in a similar power envelope (or the same performance at half the power), with the ARM architecture providing additional power efficiency. The new processors will also support Freescale’s StarCore digital signal processing (DSP) chips and will include hardware acceleration at Layer 1 for LTE-Advanced capabilities.
Freescale has an arguably bigger presence in the markets for smaller chips, with its microcontrollers (MCUs) having significant share in automotive, industrial and telecoms. This positions it well to serve the emerging market for chips that provide the performance of small SoCs, at MCU power levels – an area being addressed by most forward-looking silicon vendors.
Freescale’s contribution to this new category involves a whole new label- instead of SoC, it dubs its new design an SCM (single chip module). This is designed to provide the functionality of an SoC with lower power and size, and with a high level of pre-integration, so that customers can get products to market up to 25% more quickly – helping level the playing field of the smaller developers, by providing an accessible readymade base platform.
Freescale says its initial SCM is based on dual ARM Cortex-A9 cores (the A9, like many older technologies, is gaining a second lease of life from the IoT. Having been introduced for smartphones and digital TV in 2008, it is still a workhorse for ARM in general purpose, low power applications without hefty processing demands).
The SCM will contain the key elements of an SoC, but with more elements integrated on top of the processor cores, notably gigabytes of DRAM memory, a power management chip and a flash memory chip. This leads to a 50% reduction in board space, says Freescale. The first model, the i.MX 6D, is just 14 x 17 x 1.7 millimeters, including a gigabyte of Micron DDR2 memory on top.
It integrates total of 109 components in the package, all interconnected using a proprietary technology, without which a 6-inch printed circuit board would be needed to mount all these parts, Freescale claimed – and it is due to arrive in August, with Linux or Android evaluation boards available from Arrow Electronics.
Packing everything into a single module is a sensible move, which will be difficult for rivals to copy. However, the power consumption will be the major challenge – as everywhere in the IoT. The i.MX 6D can only currently target mains-powered IoT and graphics devices, since it consumes 3-5 Watts – but the family will be extended shortly into “portables, wearables, autonomous sensing nodes, and automotive applications.”
Another approach to the hinterland between MCUs and processors is to offer a heterogeneous platform combining both. Freescale has achieved this too, with its i.MX 7 app processor. This runs on a mixture of high speed MPUs and low power MCUs, either of which can be turned on and off depending on the task being performed, to deliver the best performance:power ratio.
This approach has been seen in mobile, on Texas Instruments’ OMAP series, and the i.MX 7 implements it using one single or dual core ARM Cortex-A7 paired with a single 288MHz Cortex-M4 MCU. Currently 32-bit, a 64-bit version is due later this year, the chip is being evaluated in wearables, smart home and industrial control devices, and e-readers.
Perhaps the most interesting news for IoT-only parties are Freescale’s efforts to combine MCUs with connectivity – as seen in a new family of MCUs within its Kinetis range, which have added Bluetooth Low Energy (BLE) and/or 802.15.4 (ZigBee, Thread) to the low-power processors.
The new KW40Z combines a 48MHz Cortex-M0+ MCU with an integrated 2.4GHz radio, which can address one BLE network and one 802.15.4 network simultaneously. The KW30 is the BLE-only implementation, and the KW20 is the 802.15.4 flavor.
Freescale believes 802.15.4 will come to dominate smart home and industrial automation thanks to its mesh networking abilities, combined with its low power consumption. Freescale is also promising to release more MCUs with connectivity interfaces in the near future.