Your browser is not supported. Please update it.

7 May 2015

Sigfox solidifies partnership with Texas Instruments

Sigfox, one of the most prominent of the group of LPWA (low power wide area) network providers, has broadened its ecosystem with a partnership with Texas Instruments.

This will allow all companies using TI’s sub-1 GHz portfolio to use the Sigfox network, thanks to the integration of the Sigfox software stack on the TI chips. Fresh from its $115m funding round, the new deal should increase the chances of companies opting for Sigfox deployments by adding an alternative silicon provider alongside existing partner Atmel.

TI’s CC1120 RF transceiver is named in the announcement, and the pair note that modules based on the TI chip include Adeunis’s SI868-25MW, Radiocrafts’ RC1780, and Telit’s LE51-868 S – all of which run in the 868MHz band. The CC1120DK and CC1200DK developer kits from TI are also available from TI, for those wishing to produce their own versions.

This means that any developer who uses a CC1120-based device should have immediate access to the bundled Sigfox stack. This is an extension of Sigfox’s current business strategy, which is to provide its software for free to potential users who only end up paying if they choose to connect their devices to Sigfox’s network – which is built and operated by third parties under a revenue-sharing agreement.

Sigfox says it networks use the region-specific ISM bands, including 169 MHz, 433 MHz, 500 MHz, and the more common 868 MHZ and 915 MHz bands – typically the two bands referred to in discussions of sub-1 GHz radio. TI says it will provide configurable data rates, with an upper limit of 200Kbps.

The 5mm x 5mm CC1120 itself will support applications in the 169-950 MHz range, with channel spacing down to 12.5 kHz. TI claims a receiver sensitivity of -123dBm at 1.2kbps, and -110dBm at 50kbps, with support for integrating TI’s CC1190 to increase range, thanks to its 3dB improvement in sensitivity and +27dBm output power.

For modulation, the CC1120 supports 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, MSK and OOK, and currently complies with ETSI EN 300 220, ETSI EN54-25, FCC CFR47 parts 15, 24, 90, and 101, and ARIB RCR STD-T30, T67 and T108 in Japan.

“Narrowband technology is the superior option for a global IoT network, because it offers the lowest-cost, most energy-efficient connectivity, along with the data capacity and robust coexistence, that competing technologies just cannot match,” said Oyvind Birkenes, general manager of wireless connectivity solutions at TI.

“TI’s sub-GHz technology is an excellent fit for the Sigfox network, because it supports long range and high capacity connectivity in a system-cost-optimized way that users everywhere require to fully benefit from the potential of the IoT,” said Stuart Lodge, EVP of global sales at Sigfox. “TI’s technology is a powerful endorsement, and will be a key part of our rapid network deployment in key global markets.”