Your browser is not supported. Please update it.

18 June 2015

CEVA builds WiFi portfolio around RivieraWaves acquisition

CEVA has made a trio of announcements this week, launching its RivieraWaves WiFi platform for IoT chips; partnering with Catena to provide a complete WiFi and Bluetooth offering for system-on-chip (SoC) designers; and signing a deal with Beken that will see its new RivieraWaves WiFi and TeakLite DSP included in Beken’s SoC designs for audio products.

The bulk of CEVA’s business is found in licensing its designs to chip makers like Beken, and the new RivieraWaves WiFi design includes beam forming, Wave 2 MIMO, Space-Time Block Code (STBC), Low-Density Parity Check (LDPC), dynamic bandwidth management, and WiFi Direct.

CEVA acquired RivieraWaves back in July 2014, and with its new WiFi offering, the company is hoping to add new IoT devices to its list of customers, as well as compete with the likes of Broadcom and Qualcomm for more traditional WiFi customers. CEVA currently claims that its designs are found in one-third of all mobile phones sold worldwide.

The new WiFi platform comes in three distinct flavors. RivieraWaves Sense is the first, and CEVA claims it has the industry’s smallest silicon footprint and lowest power consumption for 802.11n available on the market. CEVA says the range is aimed at wearables, medical devices and wireless audio devices, but is also applicable for other IoT devices that require the bandwidth that WiFi enables.

Normally the energy required to provide that bandwidth would mean that the battery life of the devices would be quite short, typically requiring regular recharging or battery replacements. However, CEVA claims that Sense-powered devices are able to operate for years on a single AA battery.

RIoT currently lacks the labs required to validate that claim, and while it does sound a little too good to be true, such a long lifetime could be achieved by only communicating for short periods of time separated by long intervals – although Bluetooth or ZigBee would potentially be more suitable protocols depending on the size of the messages that need to be sent.

The second RivieraWaves flavor is Surf, which CEVA bills as a high bandwidth 802.11ac SISO (1×1) and MIMO (2×2) offering. This IP block much more closely resembles the WiFi chips that are currently found in devices like smartphones and larger smart home equipment – which can fall back on rechargeable batteries or fixed power supplies. CEVA says that the 1×1 Surf offering enables an 802.11ac connection using less power than typical 802.11n designs – which would enable more bandwidth at a lower power consumption than older chips.

The final new package is Stream, CEVA’s highest performing RivieraWaves design, with 4×4 MIMO 802.11ac WiFi. This is the sort of block that will appear in home gateways and set tops, as those CPE devices evolve towards becoming fully-fledged smart home hubs. CEVA adds that the block in combination with its XC DSPs is also designed to co-exist with LTE networks, meaning it could be used for WiFi offload in small cell deployments.

All three implementations incorporate CEVA’s MAC and PHY modem functions, which are designed to be operating system agnostic – a key requirement given the broad range of possible devices and ecosystems that the chips could be deployed in. While Android and Linux will be familiar to most, new entrants such as Google’s Brillo (admittedly a stripped down Android) or other custom (weirder) environments require an agnostic approach in the chip design.

Each of the three versions can be integrated with CEVA’s Bluetooth 4.2 platforms, and to this end Aviv Malinovitch, VP and GM of CEVA’s Connectivity business unit, added “our RivieraWaves Wi-Fi IPs substantially reduce the entry barrier for customers requiring leading-edge 802.11 connectivity in their SoC designs. We have already signed up customers for all three platforms, taking advantage of our hardware and software integration and system expertize to develop low power Wi-Fi enabled products, quickly and efficiently.”

One of these such customers is Beken, a Chinese IC supplier, which has licensed CEVA’s TeakLite-4 DSP and the RivieraWaves Sense platform to add WiFi to its wireless audio SoC designs.

Beken is already a customer of CEVA’s Bluetooth designs, and now aims to consolidate the WiFi, Bluetooth and audio processing functionality onto a single chip design – which should save it a lot on manufacturing and design costs, thanks to lower BOM and reduced complexity.

Currently, CEVA has partnered with a number of RF IP providers, including Catena and Maxscend, to offer low power RF implementations of its WiFi range – key to adoption among IoT developers. The designs are currently available on a number of process nodes, including Global Foundries and TSMC, which should ensure a broad range of potential customers for the new platforms.