The tide has hit the high water mark for wireline home networking, according to Sam Heidari, interim CEO and VP of R&D at Wi-Fi chipmaker Quantenna.
He says the company’s 4×4 MIMO chips will fill the studios, TV networks and pay TV services’ requirements for home video streaming, most notably guaranteed QoS for flicker-free video and lock-box-like content security for piracy prevention.
Quantenna offers up to 600 Mbps throughput and guarantees service providers all the coverage they require at 60 Mbps to 150 Mbps, more than enough for the most demanding environment, and at near-zero Packet Error Rate. None of the other Wi-Fi chips, Heidari says, can meet those requirements.
Heidari says Quantenna can provide that performance because its chips have the full MIMO implementation of IEEE 802.11n, something no one else has done. He points out that different Wi-Fi chipmakers implement different portions of the Wi-Fi n spec, all of which are compatible. When the chip is going in a mobile device, for example, Wi-Fi n is implemented for lower-power use and lower cost.
Quantenna implemented full Wi-Fi 4×4 Multiple Input Multiple Output (MIMO), dynamic digital beam forming, mesh networking and channel monitoring and optimization. The Quantenna ‘Full-11n’ Wi-Fi product, the company says, ‘ensures the high quality that consumers expect, and the reliability that service providers demand, including full HDTV video quality with 1080p resolution, anywhere in the home, on devices ranging from HDTVs to video game consoles and networked music receivers.’ And, it’s always compatible with all existing and future Wi-Fi gear, the company says.
The result, Quantenna says, is five times the coverage and double the throughput when compared to traditional Wi-Fi. It ensures the ultra-low system latencies necessary for real-time applications, such as online bidirectional video game controllers.
Content security and privacy security comes from using an integrated digital signal processing (DSP) engine for higher-layer security acceleration.
The pay-TV companies’ goal is to get to consumer-installed home networks ‘ zero truck rolls. To help them achieve that, Quantenna has built in auto detection of access point and bridge mode, and security pre-configuration with single-touch Wi-Fi protected setup when new devices are added to the network. What else could a digital media lover ask for?
It provides a better performance, Heidari says, than the two major wireline standards MoCA and HomePlug. He gives MoCA high marks for its use of interference-free and predictable coax. However, he says all powerline network technologies including HomePlug and G.hn have three shortcomings:
– Security, because in an MDU, like in an apartment building, the power lines between residences are all connected.
– Interference from noise on the power lines all the time and made worse when a major appliance such as a microwave or vacuum cleaner comes on.
– Continuity because some homes have separate power line breakers, which can terminate the network.
For those reasons, he says, Quantenna’s ‘Full-11n’ wins every time in performance tests.
Coax technologies like MoCA and G.hn have two drawbacks, he said:
– Most of the world’s pay-TV homes don’t have coax networks. Even when they do, they usually don’t have coax connectors on every wall in every room. It’s a problem that ‘Full-11n’ completely eliminates with its Full-11n implementation.
– In an MDU, the MoCA installer must terminate the external connection for every residence that is not on the same network. It means a truck roll for the service provider.
Wi-Fi has gotten a bad rap, Heidari says. Fully implemented as Quantenna has done, it fills the most demanding QoS and security requirements.
Competitors in the Super-Charged Wi-Fi Chip Market
– Amimon
– Broadcom, which bought G2
– Celeno
– Intel has shipped 3×3 MIMO 11n chipsets.
– Marvell has shipped 3×3 MIMO 11n chipsets.
– Microchip, which bought ZeroG
– Qualcomm through its acquisition of Atheros
– Quantenna
– Redpine
– Silicon Beam, which is acquiring SiBeam
Some are using conventional Wi-Fi standards and bands, others are looking to run Wi-Fi in 60GHz frequencies (WiGig) or to adopt alternative 60GHz technologies such as WirelessHD like SiBeam.
Quantenna appears to have the lead because of its Full-11n implementation, 4xMIMO technology and wins at Motorola and Swisscom. However, it’s early in the game and there’s lots going on behind closed doors.
As proof-of-concept, Quantenna ran several tests using industry methods and comparing its Full-11n Wi-Fi to other versions of Wi-Fi chips.
To show that its Full-11n chips are a serious offering, Heidari says, as we have reported previously, that Motorola will use the Quantenna 4×4 MIMO chips in its upcoming VAP 2400 video bridge. That’s a major win considering that Motorola is one of the major makers of STBs for the pay-TV industry.
Motorola said that it’s also seriously considering making the VAP 2400 directly available to consumers through retail stores. There are lots of smart TVs, Blu-ray players and adapters being sold that need a flicker-free video stream, something that ordinary Wi-Fi does not always provide.
The telco Swisscom is already deploying Netgear video bridges that have a prior version of the Quantenna MIMO chips.
However, it’s probably not Quantenna chips that are in the Cisco STBs that it’s reportedly making for AT&T.
Heidari said there are tons of telcos and service providers worldwide that are testing boxes with the Quantenna chips, testing that’s taking place in the labs, customer premises or both. Watch for some more announcements, Heidari said.