Your browser is not supported. Please update it.

29 September 2011

Broadband World Forum is a platform for changing world of copper

We know that copper is changing and we know that the inventions of the Father of DSL, the John Cioffi, CEO of Assia, is behind much of the change, and that fundamentally, whether you are a fan of Phantom Mode or of node scale vectoring, 100 Mbps on a single twisted pair is soon going to be a standard offering that makes the cable world tremble.

Why should it tremble exactly? Because it is a speed that Telcos can reach, on existing plant and cabling, with minimal up-front investment, compared to the DOCSIS 3.0 that cable has had to spend and spend on.

The gap between the rich and the poor in cable is pushing the DOCSIS haves, way ahead of the DOCSIS have-nots, and creating a two tier cable world. While the best experiment with 1.5 Gbps, and deliver 300 Mbps, real world services are still bogged down largely below the 100 Mbps level, and the Telcos are a short step away from making a step up to that level. Or is it beyond.

As everyone gears up for announcements at the Broadband World Forum in Paris this week, one US company is targeting the 800 Mbps level with DSL broadband, and although this is not a cheap option, Newport Beach , California specialist Positron Access is pushing its vectoring and bonded solution at backhaul for both DSLAMs and Mobile services.

As the world looks for cost improvements in deploying cellular, backhaul is a real problem in an LTE network, where air interface speeds are so much greater and these need to be backhauled. Meanwhile fixed line telcos are awash with fixed lines, many of them returned to the fold as individuals give up their fixed lines for cellular. Well now they can take those fixed lines, bond them together, using Assia inspired technology to get rid of crosstalk interference, and either push the signal over a longer distance or push the line a lot faster or both.

Across the US, mini DLAMS can be installed at the very edge of networks, backhauled in this way, bringing DSL broadband to millions of US homes which were previously seen as out of reach. In Europe there are probably only 4% or 5% of homes in countries of high population density like the UK, which cannot get fast broadband, and the reason is usually because the telco doesn’t want to dig up the road and install fiber to connect their exchange. With bonded copper they can be brought into the modern world very cheaply. In less densely populated countries countries like France and Spain this might affect very high numbers of homes, perhaps 30% of the entire country.

In the meantime everyone is announcing something for Broadband World Forum. Alcatel is showing off its super-fast 100 Mbps broadband lines with Belgacom, Assia is announcing a deal with Ikanos, where one provides the chips to device makers and the other provides the central office technology to allow vectoring (elimination of crosstalk in bundles of telco lines). We’re fairly sure that the Alcatel announcement is based around Ikanos chips at the DSLAM anyway (although Broadcom has also announced a product today), and probably has come about with a consulting deal to Assia, despite the complete lack of acknowledgement that was in any of its announcements.

This will be the story of the next three years ‘ copper moving to 100 Mbps without bonding and beyond with bonding, prior to the world feeling that it has no choice but to move to fiber, and with Ikanos being one of the best placed smaller chip companies was the first to license the Assia technology, which is now built into broadband standards

And in one of Broadcom’s major announcements for the show it is also entering the fray ‘ Broadcom’s habit is always late, never last, and it tends to drive large volume chip markets down in price and in the process eat into smaller rivals.

Broadcom says it has the first VDSL2 central office chipset (perhaps not first) which integrates G.vector, which is the name of the ITU standards work which has sanctioned the Assia work. Broadcom says that G.vector increases VDSL2 coverage, almost doubling the reach of 50Mbps and 100Mbps services to 1km and 400m respectively. Broadcom says that it is offering support for high-density line-card level vectoring for large nodes too, and offers the chips with bonding as well.

Broadcom rightly makes the point that IPTV operators suddenly will have many more homes within their reach while reusing existing copper infrastructure. As we said, that is entirely the name of the game and the focus of this year’s Broadband Forum.

The Broadcom central office system comes with all the relevant DSP and analog front-ends, and line drivers and it says it supports Gigabit Ethernet connectivity and that the central office system will speak to existing Broadcom chips which are already in the field.

Alcatel-Lucent has supplied more than half of the VDSL2 lines in the field today worldwide and says that in 2010, it developed the first Vectoring prototype, and has field trials with Belgacom, Telekom Austria, and Turk Telekom.