Intel has unveiled the Edison, a tiny but powerful computer in an SD card that will be aimed squarely at tackling ARM’s dominance in the low power processing market. Revealed at CES, the low-power device should find a home in wearable and Internet of Things products, where ARM is firmly in control.
Based on the existing Intel Quark processor, the computer is housed in an SD card form factor with built in low power Bluetooth and WiFi. It is said to support multiple operating systems, which naturally includes Linux, according to Intel CEO Brian Krzanich, who keynoted at the show, and he also mentioned support for Wolfram, a mathematical programming environment. Expect more software layers to emerge as this is lined up as an IoT building block, in particular those that will support wearables.
Edison has the same I/O back panel as a regular SD card, and in that regard much resembles the Electric Imp ‘ another SD PC that has been available for over a year now. The Imp is used for IoT connectivity, but the Edison is much more powerful and has the benefit of x86 architecture and its 400MHz Quark processor, as opposed to the Imp’s 90nm ARM Cortex-M3. The greatest problem with Edison may be in its power consumption, as ARM has secured the market thanks to its extremely power efficient processors. With a maximum total drawn power of 2.2 Watts, the Quark processor in the Edison may prove too power-hungry for developers.
Krzanich hopes that the computer will ‘enable rapid innovation and product development from a range of investors, entrepreneurs and consumer product designers’ when it is released in the summer. He pointed out that ‘wearables are not everywhere today because they aren’t yet solving real problems and aren’t yet integrated with our lifestyles.’ Krzanich wants the Edison to address these issues.
The CEO’s announcement is part of a greater scheme of refocusing Intel on its core products. After the failure of its TV experiment OnCue, in which it is still trying to secure a buyer to recoup its $500 million costs, Krzanich was appointed to bring Intel to the fore in mobile devices, as PC sales decline. With ARM dominating the mobile market, Intel hopes that its latest launch may get it back in the ring.
Built using 22nm and the Quark processor design, Edison is as powerful as a Pentium-class PC, thanks to its dual-core SoC. With low power DDR2 RAM, NAND flash and a dedicated Edison app store, the platform will compete heavily in the wearables market. Announced on the back of the Intel smart watch and Jarvis headset unveilings, the Edison demo already has an unusual application.
Intel’s Nursery 2.0 featured a Mimo baby monitoring onesie that tracked the temperature and movement of a child, which then used Edison to display information on a very large coffee mug. The cup had a green smile to indicate that the baby was okay, but a red grimace that lit up to indicate that something was wrong. Edison was able to switch on a bottle warmer, should the upset infant need feeding after alerting its parent via the sensors in the onesie. Although it was an unusual way to demonstrate the power of the Edison, Intel’s newest computer could be used in much more exciting ways. The processor was in a Green turtle that looks removable, and is probably Velcro attached to the apparel, if Intel expects the parents to remember to remove it, instead of washing it with the onesie (babygro).
Smaller computers are vital to the growth of the wearable market, and to the IoT as a whole. With a Bluetooth and WiFi transmitter built into the Edison, both professional and amateur users could use this Intel product in all sorts of applications. The CES announcement spoke of a wireless charging bowl, which would be used for the wearables market, but the Edison could be powered in a multitude of ways ‘ much like its cousin, the Galileo Arduino board. With batteries, solar panels, or even direct wiring, the small computers can be used to connect and operate remote devices to networks. Arduinos are almost modular in design, and can be connected to sensors and circuits with almost limitless possibilities, including talking clocks, thermostats, Theremins, beer kilns and of course, diaper sensors. Perhaps the Intel demo was not so far from the mark after all.
The biggest problem for the Edison is that it is too big for the wearables, and too power-hungry for many IoT implementations. The most important criteria for wearable devices is the size, and once you have added in batteries, screens, I/Os, and the other necessary pieces, the Edison becomes impractical for wearables. Similarly, the Electric Imp claims to be able to run for years on two AA batteries, thanks to low power sleep modes and fast wake speeds. That allows it to connect a device in a home or business without inconveniencing its owner by chewing through batteries.
With the Quark processor’s total drawn power rating of 2.2 Watts, at full capacity it would drain an AA cell in an hour. Put simply, the Edison is too powerful for IoT connectivity applications. The extra processing power wastes battery supplies. If run at ultra-low power levels, like the Imp, it must be asked whether developers would ever pay the extra for horsepower they won’t use. Intel may have missed the mark here. You don’t need the power of an old Pentium desktop to turn a switch or log an event ‘ the typical IoT device implementation.
Nonetheless, Krzanich hopes to fuel development of wearable devices, and has launched the Make it Wearable competition, with $1.3m in prize money and $500,000 for the first-place winner. The challenge will also connect contenders with ‘industry luminaries,’ to help realize and create their respective ideas. With the likely impracticalities found in Edison, it looks like visionaries are the only people who will be able to utilize Edison to its full potential.
Krzanich was appointed to guide Intel along a new path, continuing the pattern of CEO appointments at the company. With the focus on wearables and microcomputers, Intel has staked its claim in the market. Unfortunately, it looks like its stake packs too much of a punch for IoT developers, and is too bulky for wearables.