NETvisor, a Hungarian IPTV delivery and IT infrastructure company, used TV Connect to demonstrate the capabilities of its Backwards Error Correction (BEC) technology. The system, part of its iTV Sense offering, replaces packets lost in transit, to improve overall picture quality.
We’re not really sure that Backwards Error Correction is a real thing. Surely these are retrospective packet requests, part of the TCP algorithms, or rather ARQs, Automatic Repeat reQuests, which have been built into systems for decades.
This particular version of this BEC technology began life in Netvisor’s PerformanceVisor business IT system, which monitors the performance of databases, applications, virtualization, storage and network infrastructure. It is used to diagnose and treat issues in the network.
Netvisor says that 90% to 95% of video display errors caused by packet loss can be corrected by its BEC. The appeal of this system to TV operators is the ability to improve the picture quality of IPTV and OTT delivery. Obviously for something to be resent, it must be recorded for a while somewhere, and in this case it is between
the head end and the set top, on servers in the distribution network. Cisco does something similar in Videoscape and Ruckus Wireless used to do the same within a home.
The idea is to place BEC servers from Netvisor as appliances throughout your network, which continuously cache IPTV packets, and reserve them when the iTV agent in the set top detects packet loss. The problem in an IPTV set top is that the communication is over a multicast IGMP system, so it has to phrase its request in a UDP request instead, and then collate the unicast arrival of the last packet back into the frame. Since most set tops in IPTV carry only around 200 milliseconds of content, the round trip for this has to be real quick. Microsoft did something similar to this when it built its proprietary rapid channel change in Mediaroom, back in 2004, where it stored an I-Frame in its D servers, and when a channel change request came it, which could not be resolved without reference to that I-Frame it accelerated it to the storage in the set top, and blended it with the current multicast frame.
The BEC server decides if the error can be corrected with the packets it has available, and if it can be then the missing packets are pushed to the set top. The error correction packets can be sent in unicast or multicast, if the same error has affected multiple set tops. Although we cannot see how all set tops in an IPTV network can have the same error at once, unless the cache also has it.
The speed of the service means that linear broadcasts shouldn’t be affected by the error correction. The packets are inserted into the packet stream in the correct order, so that the picture quality is rectified before the broken output is pushed to the screen.
The company says the repair process typically takes between 30 and 200 milliseconds. The error event reports are also stored and used to provide the TV operator with feedback on the quality of its service ‘ often allowing it to diagnose issues within the network that can be targeted for repair or improvement.
Netvisor’s iTV agent deployed on the consumer set top is a lightweight Linux kernel that operates as middleware. If an operator chooses to adopt the BEC system, the only thing the consumer will notice is the improved picture, as the middleware can be installed on the set top remotely.
BEC can be integrated into an existing IPTV system, and the company said that only a few units will make a noticeable difference to the picture quality, helping to reduce churn among unhappy consumers. Even data as specific as the CPU performance of the set top can be monitored.
iTVSense provides operators with a dashboard and central manager that allows
them to monitor the signal quality in their networks from head end to customer premises. Netvisor provides probe units that can be deployed around the network to analyze the streams.
The larger probes can monitor 200 TV channels, with mini probes focused on 3-20 channels, looking for packet/byte rates, jitter, overall packet loss and the number of counter and encapsulation errors. While BEC is the more interesting part of the Netvisor offering, the analytics collected are of clear benefit to the operators. Mini probes can even be deployed at the consumer premises if needed.
The performance of all elements of the TV network can be examined, including encoders, conditional access, VoD, middleware, DHCP and CPE firmware and OSS/BSS interfaces. Netvisor also told us of an upcoming deployment with Dubai-based Etisalat, where its technology will be used to try and alleviate QoS issues in the IPTV delivery.