Your browser is not supported. Please update it.

9 October 2014

Israeli startup Sckipio ignites race to G.Fast dominance

A small group of engineers at start-up Sckipio in Israel have beaten the giants of the telecoms industry to the punch, releasing what it claims is the first G.Fast chipset for both CPE and distribution points.

G.Fast is a developing standard which many consider to be the best way for copper infrastructure to rival fiber’s speed, and with this launch it looks like it could soon massively boost the bandwidth of existing twisted pair telco copper.

Announced at the Broadband Taiwan conference, the new DP3000 G.Fast DPU (distribution point unit) chipset and the CP1000 CPE chipset, promise 1Gbps speeds on last-mile connections, based on the ITU G.9700 and G.9701 recommendations – a standard that has yet to be ratified, but is expected to be approved in December.

Companies like Sckipio are up against both silicon giants, like Broadcom  and smaller rivals, such as Ikanos, which are just as agile, and its only real chance was to get to market first with G.Fast, something that it has promised to do since it swept onto the scene last December promising to brings it chips to market first.

In December Sckipio raised $10 million from four VC funds including Gemini Israel Ventures, Genesis Partners, Amiti Capital, and Aviv Ventures, a sure indication that the company is seen to have a market lead in developing a viable G.Fast chip.

As this is a pre-standard technology, there is always the risk that the Sckipio chips become incompatible with the approved industry specification. However, when Faultline discussed BT’s G.Fast trials last week, we name-dropped Sckipio as another G.Fast player, who had claimed to have provided 20% of the standard so far and who was working on a chip. You would hope that a company so engrained in the technology would not release chips that would be outdated within months, so we think it’s safe to bet that these chips will be compatible come the end of the year.

The DPU3000 chipset can either be used to run multiple G.Fast lines supporting up to four 1Gbps G.Fast lines per chip, or it can also be used to support vectoring, including noise cancellation, in larger boxes for up to 64 subscribers. The DPU boxes will look after 10Gbps of aggregated bandwidth, and support IEEE 1588 for cellular backhaul. Sckipio also claims the chipset has ultra-low power consumption.

The DPU3000 is currently housed in the DP3016-EVM evaluation box reference design, which we expect will evolve into the DPU’s that ISPs deploy at the network edge in street furniture, effectively a mini DSLAM. The DP3016-EVM contains 4 of the DP3000 chipsets, to support a total of 16 G.Fast subscribers. It should be noted that the box still only supports 64 vectored subscribers, but does claim a low power consumption of 1.5W per line. Sckipio says that the DPUs can be deployed up to 250 meters from the home, but doesn’t clarify the speeds that the home will be getting at distances approaching the upper limit.

The CP1000 is the chip that lives in the CPE, and will be available in both analog front end and digital versions. It too will support IEEE 1588 cellular backhaul, and Sckipio includes it in the CP1000-EVM evaluation box reference design – which turns the G.Fast signal into one that can be sent over Ethernet, and therefore into a wireless router.

Lantiq has announced that its EASY330, which uses Sckipio’s CE1000, is the industry’s first G.Fast reference design for a residential home gateway. The EASY330, according to Lantiq, 802.11ac WiFi, gigabit routing, gigabit Ethernet switch and PHYs, and carrier grade VoIP.

Other companies who have already adopted Sckipio’s chips include Suttle (MediaMAX wall-mounted CPE Ethernet bridge, as well as DPU), XAVi (DPU, residential gateway, and CPE modem), VTech (DPU, home gateway, and Ethernet bridge) and Zinwell (DPU and CPE Ethernet bridge).

That’s a lot of early market design wins and while it is always possible that customer trials will result in chip swap outs to newer entrants, it is Sckipio’s market to lose, rather than the other way around. The only cloud on the horizon is that this is really too early to market, and many telcos around Europe in Particular, are focusing on installing vectored VDSL2 lines right now, while simultaneously they create new street furniture closer to the home and take fiber deeper into the network.

But traditionally a first to market advantage usually means that acceptance trials are more advanced when devices and chip decisions are being finalized and it can prove decisive.

As for the IEEE 1588 cellular backhaul, Sckipio notes that G.Fast will play a big role in backhauling cellular mobile traffic for small cell deployments over twisted-pair copper lines. IEEE 1588, more commonly known as Precision Time Protocol, is a protocol used to synchronize clocks throughout a computer network – and that synchronization is important to maintain the quality of the line in a G.Fast deployment, as the current Network Time Protocol (NTP) is not accurate enough. It is also a cheaper solution than adding GPS units to all the distribution points, and provides the sub-microsecond accuracy required by G.Fast but not delivered by NTP.

Sckipio in some of the wording used in the release materials  are clear like digs at the competition. “Sckipio cut no corners, unlike some VDSL-modified solutions pretending to be G.Fast. The DP3000 is 100% G.Fast, handles up to 10Gbps of traffic and supports the entire 2MHz to 106MHz G.Fast spectrum.”

“Sckipio is delivering on the full promise of G.Fast,” said Sckipio CEO David Baum. “With our new chipsets, service providers won’t have to wait to get real G.Fast with all the features and benefits the technology has to offer.” Sckipio’s release also pointed out that before its announcement, the prevailing expectation of G.Fast’s arrival was set for late 2016.

Arteris, a specialist in SoC interconnects, said in a release timed for the same day, that its FlexNOC fabricIP technology was used to create get the Sckipio chip out quickly. Arteris said its SoC design tools are routinely used by Samsung, Altera and Texas Instruments.

A number of other major European operators are planning early trials for G.Fast and these include Telekom Austria, which last year claimed to have recorded speeds of 800 Mbit/s over loop lengths of 100 meters, and Swisscom, which is collaborating with Huawei on the technology. Germany’s Deutsche Telekom was reported in February to be planning its own G.Fast trials later this year.

The market shape will become extremely clear when Adtran, the incumbent supplier at Deutsche Telekom, and Alcatel, the broadband market leader that bought into Ikanos last week, and Huawei, all make known their preferred G.Fast chip supplier. If they also choose Sckipio, then this is a slam dunk for the tiny Israeli, however why would Alcatel throw Ikanos a lifeline if it was planning to get its G.Fast chips elsewhere, and we have yet to see a move by Broadcom, almost predatory when it comes to commoditizing a market and taken chip pricing to the floor.