Your browser is not supported. Please update it.

1 October 2015

Chunghwa Telecom and AlcaLu first to deploy system-wide G.fast

By Charles Hall

Chunghwa Telecom, Taiwan’s leading telco, will use Alcatel-Lucent’s G.fast gear in “the world’s first commercial deployment of G.fast ultra-broadband access technology.” G.fast is the telcos answer to the cablecos’ hybrid fiber-coax network infrastructure. G.fast allows telcos to accelerate data flow over their existing copper phone wires that connect the home to the telco’s fiber network – without having to install fiber all the way to and inside the residence.

The companies said that currently 68% of homes in Taiwan use a cableco broadband service, not a dissimilar percentage to other areas where cablecos operate. Telcos are counting on G.fast to stop the inroads the cablecos are making in the broadband market and help it claw back market share.

Like all broadband and home networking announcements these days, the two cited 4K – because of “the growing demand for 4K TV and streaming HD video services, the need for ultra-broadband access is steadily increasing.”

Chunghwa Telecom has very aggressively started a nationwide roll-out of a FTTN (neighborhood) infrastructure that uses a combination of fiber and copper technology, specifically Alcatel-Lucent’s GPON and G.fast technologies. Chunghwa Telecom said Alcatel-Lucent and its Bell Labs research arm “have played a pioneering role in the development and implementation of G.fast, which has already been in trials with more than 30 operators worldwide.”

G.fast allows telcos to provide ultra-broadband access to locations where fiber deployment is difficult – plus, and it’s a big plus, G.fast eliminates the need to rewire entire buildings and homes, the most costly and time consuming part of any FTTH (home) deployment.

Chunghwa Telecom expects to quickly provide fast broadband to tens of thousands of homes in Taiwan within two years and meets the country’s National Communications Commission plan to improve fixed broadband access in hard-to-reach residential locations. Initially it will offer G.fast broadband to 8.4 million Taiwanese homes in low- and high-rise buildings in the fourth quarter of 2015.

Ken Wu, president and managing director of Alcatel-Lucent Taiwan said, “By adding our G.fast technology to its portfolio, Chunghwa Telecom can better meet the demands of any deployment scenario to quickly and cost-effectively connect customers with the highest speeds in a highly competitive market.”

Over 30 telcos are currently trialing AlcaLu’s G.fast gear and we expect AlcaLu to make more announcements of G.fast wins by year end. The Chunghwa Telecom validates the G.fast technology – a rapid process for a technology that was only approved as a standard a year ago.

All of which raises the question: where is AT&T and the rest of the world’s telcos that are still using copper wire to the home? Almost all cablecos already offer 100 Mbps and are deploying 300 Mbps, on their way to 1 Gbps in the next year or so. How is it that telcos such as AT&T and CenturyLink offer maximum speeds less than 15 Mbps in most of their footprint – and then have the gall to advertise themselves as technology innovators?

We can see that speeds above 100 Mbps don’t help most consumers much, because they don’t (yet) have applications which need higher speeds. 100 Mbps is more than sufficient for several 4K streams. Beyond 100 Mbps, it becomes a marketing war between telcos and cablecos, one that cablecos are currently winning – except where a telco has built an all-fiber or a G.fast network.

The Next Speed Barrier – the Home Network: Once a home gets broadband speeds upwards of 100 Mbps, the biggest speed barrier will be the home network. Broadband services and their customers will have to upgrade their existing home networking gear, whether it’s an all Wi-Fi network or a combination of Wi-Fi and wireline (powerline, Ethernet or coax). But marketing counts. 1 Gig sounds much better than 100 Mbps.

This first ran in Rider Research’s Online Reporter