Your browser is not supported. Please update it.

7 September 2005

Motorola and IEEE look to combine powerline and wireless

There are increasing moves to converge powerline and wireless technologies to bring broadband access to inaccessible parts, whether rural areas, using the electricity wires (Broadband over Powerline or BPL), or to corners of the home or office, using plug-ins.

The use of combined technologies will make it logical to harmonize standards too, and one of the main powerline industry bodies, the HomePlug Powerline Alliance, announced at last week’s Intel Developers Forum that it was aiming to become part of the IEEE standardization efforts that control the 802.11, 802.16 and 802.15 wireless specifications.

The Alliance will create an Implementers’ Forum Board of Directors, which will include Intel, Cisco/Linksys and Motorola among its sponsor members, heavyweight support that will boost its ambition to have its standards adopted by the IEEE, as well as the European body ETSI. Other members of the new board include cableco Comcast, ISP Earthlink, retailer RadioShack, plus Japan’s Sharp and Sony.

HomePlug has three key platforms 1.0 + AV for broadband in-home networking; BPL for broadband access over powerlines; and home automation, for low bandwidth industrial or home control applications. The new move is a response to the IEEE’s formation last month of a working group, P1901, focused on BPL, which has raised fears of a split between two standards that could fragment vendor efforts and deter potential powerline adopters.

Philip Poulidis, senior director for BPL standards at one of the most prominent chip players in the niche, Intellon, said in an interview, ‘We welcome the IEEE effort, but it’s no secret IEEE standards take a long time. We hope that we can bring a fully functional PHY and MAC chip to the table and that IEEE will take that into consideration.’ The PHY (physical layer) and MAC (media access control) specifications for HomePlug for AV were approved by the HomePlug Powerline Alliance earlier this year.

HomePlug is undoubtedly the most advanced body in developing such technologies and so it would be logical for the IEEE to adopt the technology for its own efforts in order to speed time to ratification of a standard, the slowness of this process increasingly threatens to sideline the IEEE and put the industry entirely into the hands of vendors with the power to set de facto standards, as we have seen in the stalemated 802.15.3a UltraWideBand-based effort for fast home networking, which is likely to be superseded by a de facto version supported by the WiMedia Alliance.

The support for HomePlug from Sony, Intel, Cisco and Motorola, all so influential both in the home networking market and in the wireless standards targeting the same sector, including WiMedia, will enhance HomePlug’s chances enormously.

Indeed, approval by the IEEE could be the last element required to ensure the Alliance’s success and make BPL as prominent on the communications agenda as wireless. One vendor that is racing ahead of any standards efforts in wireless-powerline integration is Motorola, which will use chipsets from Intellon to provide HomePlug 1.0 based BPL products for utility companies that wish to use their networks to become ISPs. Motorola will combine BPL with its wireless ISP product, Canopy, which will be migrated to WiMAX next year. Canopy can be used instead of the more usual Wi-Fi to cover the last mile from electricity pole to home, with HomePlug for distribution within the house; or HomePlug can run to the home with Canopy for backhaul. A key part of Motorola’s strategy is to target alternative service providers, such as utilities, with multi-technology platforms for bringing internet, mobile and triple play services to the home without the need for a cellular license or DSL build-out.

Combinations of WiMAX, Wi-Fi and powerline technologies are one of its preferred routes for non-cellular operators. HomePlug 1.0 is limited to 14Mbps but the next generation specification, HomePlug AV, will deliver 200Mbps, with backwards compatibility with 1.0. Intellon has created an intermediate, non-standardized step called Turbo with 85Mbps performance.

The HomePlug BPL standard is mooted for next year, for ISPs using powerlines for access, and the aim is to harmonize the chipsets for this and AV, and for the home control variant, to boost volumes, enhance integration and reduce costs. In addition to integrating HomePlug and Canopy, Motorola has invested in Intellon’s second round of funding.