Wilocity has used Mobile World Congress to debut its 4.6 Gbps WiGig chip for smartphones. Now called Wil6300, but previously codenamed Sparrow, the chip is designed to provide very fast connections over 802.11ad WiFi in the 60GHz spectrum. Previously Wilocity has only produced a tri-band chip for in-home use which combines 2.4 GHz, 5.0 GHz and 60 GHz in the same chip, with the help of Qualcomm Atheros.
Wilocity emerged in 2007, founded by executives and engineers from Intel’s Centrino division. It was a founding member of the Wireless Gigabit Alliance (WiGig) and initiated the creation of the IEEE 802.11ad Task Group.
2010 saw Wilocity work with Qualcomm Atheros to develop a ‘tri-band’ (2.4, 5, and 60 GHz) reference design that combined Qualcomm’s VIVE 802.11ac with 802.11ad in a single module ‘ the AR9004TB. This allows users to enjoy the 4.6Gbps short-range speed while staying connected to the network over the more common WiFi frequencies.
The Wil6300 chips should be available in Q3 2014, and will begin cropping up in smartphones next year.
The unveiling promised that power consumption would be in the 200 to 300 milliwatt range in typical usage scenarios, the company claims that ‘battery life and power usage will be the same as using regular WiFi.’ We’re not sure we believe that but then again we were astonished that you can get this only a phone at all.
The 802.11ad signal is now said to be able overcome its short wavelength by finding alternate paths to the intended recipient. If a person walked in front of the antenna, Wilocity is confident that streaming would not be interrupted as the signal should be reflected around the room and reach the streaming device.
The envisioned implementation of the Wil6300 chip will center around transferring large files very quickly, most likely streaming a lossless 4K film from a handset to a TV. At least, that’s the line that many outlets are running with, and let us tell you why that’s bogus.
Phones don’t have enough internal storage to make them a 4K hub for your TV, which WiGig can then stream from phone to screen. Timescapes, the first commercially available 4K film, was sold on an external hard drive in a ‘near lossless’ Cineform codec and totaled 330GB in size.
Rough calculations suggest that a 90 minute 4K film encoded in HEVC would clock in at about 8GB. So a user could fit a maximum of 7 4K films on their 64GB iPhone 5S, with room left for their OS. That’s not exactly a gateway replacement and that’s the encoded format, which defeats the purpose of the massive bandwidth of WiGig that many outlets hope would allow users to stream lossless quality 4K from phone to TV.
Even the new Galaxy S5 with a 128GB microSD can’t fit the near lossless TimeScapes on it. So it looks like local storage of uncompressed 4K is out of the question, so how about streaming it from the internet via phone to TV? Why not cut out the middleman and just stream it from the router to the TV directly? But then why wouldn’t you use a wired connection to counter the possibility of a blocked signal? And who can stream a lossless 4K film from the internet at the moment anyway? Why this interest in streaming lossless formats over WiGig?
Well we think most people have got the wrong end of the stick here, and the right end is something that is quite easily extrapolated from the current implementations of WiGig. 802.11ad chips have so far shipped in the region of 1 million units, found in many of Dell’s enterprise laptops, docks and workstations. Dell is using the massive bandwidth as a clutter reduction tool for businesses.
Dell supplies a dock with a WiGig chip in it, to compliment a laptop with another WiGig chip inside. The D5000 dock is then used to connect all the peripherals (monitors, Ethernet networking, USB hubs, storage, etc.) to the laptop using only the WiGig connection. All of that data streams from the hub to the laptop, leaving the laptop cable free ‘ which down the line could cut some of the laptop’s manufacturing costs if the hardware is shifted from the laptops to a bundled hub.
Very fast file transfers and backups from a laptop or smartphone to a homehub or media gateway is the most practical application for WiGig in the current market. When homes have Gigabit internet connections, WiGig could certainly be used to stream lossless 4K, but would that really be from your phone? For now though, its much more useful as a cable-free syncing tool.
If anything, streaming 4K movies from a media center (with the necessary storage capacity or a wired connection) to a phone makes more sense, although no phone currently on sale has a 4K screen. And if no phone has a 4K screen, why would you put a 4K film on it in the first place, to stream back to a 4K TV? You would step it down to HD and then you can shift it using conventional WiFi.
So forget the 4K bit of this and instead focus on the really rather fast transfer speeds that Wil6300 will allow phones to use. Backups could be completed in a few seconds, without having to plug in the phone to your PC. This is the more useful application for users. It’s just not as exciting as sticking the 4K buzzword in a lead paragraph.