Your browser is not supported. Please update it.

22 October 2015

G.fast hot topic at BBWF; BT makes ambitions clear

Chipset and distribution unit vendors in the G.fast sector are developing quickly in the right direction, and operators are now realizing that they can use their existing copper assets to improve broadband speeds – in the UK Sky, Vodafone and TalkTalk all want to make an investment in faster fiber services, but worry that BT will undercut its prices using G.fast and existing infrastructure.

It was previously thought that operators such as BT, looking to add G.fast to its broadband strategy, would deploy the technology from distribution points relatively close to the consumer home.

However, the UK operator announced at this year’s Broadband World Forum (BBWF) in London that this would not be economical due to the large number of distribution points it has dotted around the country. Its plan instead is to introduce the tech into its street cabinets around 300-350 meters away from the subscriber home – with the ambition of providing G.fast-based 300-500Mbps services to 10 million UK properties by 2020.

Trevor Linney, BT’s head of access network research, explained that an added incentive of G.fast technology is that with the use of spectrum guard bands, BT will be able to deploy G.fast without causing any disruption to existing VDSL services. “It’s ready to go into the network without requiring customers to upgrade their modems or change their CPEs unless they wish to move to the new service,” said Linney.

BT also announced that it was able to deliver more than 5 Gbps over copper loops of 35 meters and speeds of around 1.8 Gbps at distances of approximately 100 meters, during trials using the experimental XG.fast technology, in partnership with French company Alcatel-Lucent.

“The delivery of 5 Gbps over 35 meters, which coincidentally is the typical distance of our final drop, just shows the potential of copper to deliver higher speeds,” said Linney. “It’s a signpost that copper has more to give.” Although, the operator has indicated the technology would not help BT to provide ultra-fast broadband services over longer distances.

With the current flurry among vendors in this sector, we can probably expect some exciting M&A action in the not too distant future. Sckipio was one of the vendors receiving a lot of mentions at BBWF, its DP3000 G.fast DPU Chipsets, for example, can simultaneously support four 1 Gbps G.fast ports, up to 10Gbps of aggregated backhaul and full built-in vectoring support for as many as 64 subscribers (see separate story).

Sckipio also announced a partnership with Simpler Networks, provider of automated jump switches for G.fast port provisioning density. By combining Sckipio’s high-density 32-port G.fast Distribution Point Unit (DPU) with Simpler Network’s EZ-Edge 100-port Automated Distribution Frame, the collaborative pair claim that telcos can pre-wire an entire 100-resident apartment building at half the cost.

Alcatel-Lucent’s G.fast ADSL technology is set to be rolled out by the Australian National Broadband Network (nbn) in 2017, following recent successful trials in the country. The nbn’s ambitious fibre-nearly-everywhere plans were hindered by government instructions to find a less expensive alternative – and G.fast could be the answer.

“We have conducted our first G.Fast trial in an office building in Melbourne and achieved total throughput of 600Mbps on CAT-3 cabling that was around 20 years old,” said Tony Cross, nbn’s chief architect, speaking at BBWF. “We could not use the full G.Fast spectrum range in the trial because of active VDSL lines in the same bundle – had we used the full G.Fast spectrum range we would have achieved speeds of around 800Mbps.”

BT’s Linney addressed the issue that vendors need to produce larger distribution point units that come with as many as 96 ports, instead of the original 4, 8 or 16.

Calix are one of those Sckipio vendors, demonstrating its expanded portfolio of copper systems at this year’s BBWF. The company demonstrated the interoperability between its G.fast DPUs and modems, and those of other vendors – unveiling its VDSL2 system level vectoring (SLV) systems on the Calix E7-2 modular access systems. These can deliver up to 96 vectored ports without the economic and operational burden of a dedicated vectoring control processor card (VCP).

Vendor breakthroughs such as this have encouraged Linney, speaking at BBWF, “To go from a 16-port unit to a 96-port unit would have been quite scary to the industry a few years ago, but we now see that functionality being added to roadmaps.”