Your browser is not supported. Please update it.

6 February 2014

Orange Polska trials Aethra FTTdp system in Warsaw

Orange Polska is testing fiber-to-the-distribution-point (FTTdp) with Aethra Telecommunications, in field trials in Warsaw due to last several months. FTTdp is hoped to provide 200Mbps download speeds for households in Multi Dwelling Units (MDUs), and it may deploy this across MDUs throughout all of its territories.

The FTTdp technology runs a fiber connection to the distribution point in a communal dwelling. The distribution point then uses VDSL2 nodes based on Germany’s Lantiq chips, to supply the signal into the home over the existing copper wiring in the building, which is powered by the household’s energy supply.

The great benefit that FTTdp has over FTTH is found in the access rights granted to the incumbent telco by the government. The need to provide engineers with access to homes at times suitable for occupants, and the resources required to coordinate that effort, are not necessary for FTTdp.

Instead, engineers need only access the distribution point, usually found in the basement of a communal dwelling, to make the upgrades needed to provide a fast connection to all the residents. No direct access to the home is needed as the CPE there is self-installed and in most cases the existing chips installed in broadband routers will automatically support VDSL2. This results in lower costs and shorter deployment times.

Orange Polska was established in 1991, and changed its name from Telekomunikacja Polska in 2012. Orange owns a controlling stake, which exceeded 50% as far back as 2002. It operates GSM, WLAN and UMTS networks in Poland, and had 14.7 million cellular subscribers as of late 2011.

Orange Polska has 695,000 pay TV customers and provides broadband to 5.6 million homes. Its ADSL service is called Neostrada, and is available to most of Poland’s 12 million households.

Aethra Telecommunications develops, manufactures and sells network access devices and carrier systems to telcos like Orange Polska. Based in Italy, the R&D, engineering and support departments says it has 40 years’ experience in telecommunications.

In a FTTdp promotional video Aethra explain the hardware the Orange Polska is likely to use as a single-user HNT1 (hybrid network termination) unit installed at the distribution point, which supports VDSL2 up to the higher profile called 30a using the full 30 MHz defined in the standard. It links with a RPF1 (reverse power feeder) through the copper cables which sucks out the electrical power from the customer end, and the customer needs only plug the RPF1 unit into a power outlet in their home and their master socket to power the HNT1 in the basement.

Multiple HNT1 units will need to be installed in the distribution point, as each unit serves a single household. So each household line needs an HNT1 and a RPF1. The latter can be shipped to the household, as it does not need an engineer to install, and the HNT1 can be installed as needed or in bulk in the MDU distribution points.

There have not been any figures released that contrast the cost of the FTTdp method against a comparable FTTC or FTTH installation as that’s commercial detail but we think FTTdp will be far cheaper than FTTH and in line with FTTC installations.

FTTdp has great potential in countries with high densities of people living in MDUs, which is much of Europe and includes large swathes of France, i.e. Paris. It squeezes the most out of twisted pair copper lines, which are found in the overwhelming majority of residential buildings, and looks like a cost-effective and carrier friendly method of upgrading household broadband speeds to vectoring class speeds.